Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Sintering and Electrical Properties of Lead-Free Na0.5k0.5nbo3 Piezoelectric Ceramics

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

New K0.48Na0.52NbO3–Bi(Zn0.5Zr0.5)O3 Lead-Free Ceramics: Microstructure and Piezoelectricity

SPS Sintering of NaNbO3-KNbO3 Piezoelectric Ceramics

Effect of Sintering Conditions on the Electrical Properties of Lead-Free Piezoelectric Potassium Sodium Niobate-Based Ceramics

Sintering properties of K_(0.5)Na_(0.5)NbO_3 lead-free piezoelectric ceramics

Electrical Performance and Conduction Mechanism of Potassium Sodium Niobate-Based Lead-Free Piezoceramics Via Two-Step Sintering Route

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Normal Sintering of (K, Na)Nbo3-Based Lead-Free Piezoelectric Ceramics

Ferroelectric and Piezoelectric Properties of Fine‐Grained Na0.5K0.5NbO3 Lead‐Free Piezoelectric Ceramics Prepared by Spark Plasma Sintering

Piezoelectric And Dielectric Properties Of (Na0.5k0.5)Nbo3-(Bi0.5na0.5)(0.94)Ba0.06tio3 Lead-Free Piezoelectric Ceramics

Piezoelectric Properties of Low-Temperature Sintered Li-Modified (na, K)Nbo3 Lead-Free Ceramics

Effect of Sintering Temperature on Electrical Properties of Na0.5K0.5NbO3Lead-Free Piezoelectric Ceramics Prepared by Normal Sintering

Compositional dependence of piezoelectric properties in Na xK 1-xNbO 3 lead-free ceramics prepared by spark plasma sintering

Visualizing sintering process and electrical properties of SnO2 doped K0.48Na0.52NbO3 piezoelectric ceramics

Lead-free Na0.5K0.5NbO3 Piezoelectric Ceramics Fabricated by Spark Plasma Sintering: Annealing Effect on Electrical Properties

Na1-xKxNbO3 (x=0.2~0.8) Lead-Free Piezoelectric Ceramics Prepared by Spark Plasma Sintering

Phase Transition and Electrical Properties of Lead Free (na0.5k0.5)nbo3–bialo3 Ceramics

Low-Temperature Sintering of ZnO and B2O3 Co-Doped (k0.5na0.5)nbo3 Lead-Free Piezoelectric Ceramics

Piezoelectric and Dielectric Properties of (Na<sub>0.5</sub>K<sub>0.5</sub>)NbO<sub>3</sub>–(Bi<sub>0.5</sub>Na<sub>0.5</sub>)<sub>0.94</sub>Ba<sub>0.06</sub>TiO<sub>3</sub>Lead-Free Piezoelectric Ceramics

High Piezoelectric Properties and High TC in KNN-Based Lead-Free Ceramics Sintered in Reducing Atmosphere