Abstract:One of the key remaining challenges for the most promising Pb-free (K, Na) NbO3 (KNN) piezoelectrics is how to improve the temperature stability of piezoelectric voltage coefficients, which is vital to promoting their practical applications. This study proposes an effective approach to develop highly piezoelectric KNN-based ceramics with temperature-insensitive piezoelectric voltage coefficients (d(33)), which is also called direct piezo-coefficient, by broadening the boundaries from tetragonal to orthorhombic and then to rhombohedral phases. The Li-doped KNN ceramics modified with BaZrO3 and (Bi, Zr)TiO3 exhibit a high d(33) up to 330 pC N-1, whose variation is limited to +/- 10% in a common application temperature range (25-100 degrees C), when their composition is optimized for strengthening their temperature stability. A high d(33) up to 380 pC N-1 with a larger variation (<20%) but in a wider temperature range (25-200 degrees C) was also available in the present materials possessing a large planar electromechanical coupling coefficient k(p) up to 0.54 and a high Curie temperature of 4260 degrees C as well as high strength associated with high relative density. Piezoelectric force microscopy (PFM) studies reveal that the good piezoelectric response could be related to the easier domain reorientation and domain wall motion. The present results validated that our approach based on phase transition boundary engineering should be an effective strategy for further development of high-performance lead-free piezoceramics towards the demand for industrial applications.

Piezoelectric Properties of Low-Temperature Sintered Li-Modified (na, K)Nbo3 Lead-Free Ceramics

Low‐Temperature Sintering of Li‐Modified (K, Na)NbO3 Lead‐Free Ceramics: Sintering Behavior, Microstructure, and Electrical Properties

Normal Sintering of (K, Na)Nbo3-Based Lead-Free Piezoelectric Ceramics

Low-temperature Sintering of (K,na)nbo3-Based Lead-Free Piezoceramics with Addition of LiF

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

Enhanced Dielectric and Piezoelectric Properties in Li/Sb-modified (na, K)NbO3 Ceramics by Optimizing Sintering Temperature

Enhanced Dielectric and Piezoelectric Properties in Litao3-Doped Lead-Free (k,na)nbo3 Ceramics by Optimizing Sintering Temperature

Combined Effects of Li Content and Sintering Temperature on Polymorphic Phase Boundary and Electrical Properties of Li/Ta Co-Doped (na, K)NbO 3 Lead-Free Piezoceramics

Influences of Sintering Temperature on Piezoelectric, Dielectric and Ferroelectric Properties of Li/Ta-Codoped Lead-Free (Na,K)NbO<sub>3</sub> Ceramics

Electrical Performance and Conduction Mechanism of Potassium Sodium Niobate-Based Lead-Free Piezoceramics Via Two-Step Sintering Route

Low temperature sintering and enhanced piezoelectricity of lead-free (Na 0.52 K 0.4425 Li 0.0375)(Nb 0.86 Ta 0.06 Sb 0.08) O 3 ceramics prepared from nano-powders

Sintering and Electrical Properties of Lead-Free Na0.5k0.5nbo3 Piezoelectric Ceramics

Low-Temperature Sintering of ZnO and B2O3 Co-Doped (k0.5na0.5)nbo3 Lead-Free Piezoelectric Ceramics

Low-Temperature Sintering of ZnO and B<sub>2</sub>O<sub>3</sub> Co-Doped (K<sub>0.5</sub>Na<sub>0.5</sub>)NbO<sub>3</sub> Lead-Free Piezoelectric Ceramics

Phase Structure and Electrical Properties of (Li,ta)-Doped (k,na)nbo3 Lead-Free Piezoceramics in the Vicinity of Na/K = 50/50

The Effects of K/Na Ratio on the Electrical Properties of (Li, Sb, Ta) Modified KNN Piezoelectric Ceramics at Reduced Temperature with KNbO3 as Sintering Aid

Niobate-based lead-free piezoceramics: a diffused phase transition boundary leading to temperature-insensitive high piezoelectric voltage coefficients

Influence of Sintering Temperature on Grain Growth and Phase Structure of Compositionally Optimized High‐Performance Li/Ta‐Modified (na,k)nbo3 Ceramics

The phase structure and electric properties of low-temperature sintered (K, Na)NbO3-based piezoceramics modified by CuO

Influence of sintering temperature on electrical properties of (K0.4425Na0.52Li0.0375)(Nb0.8825Sb0.07Ta0.0475)O3 ceramics without phase transition induced by sintering temperature

Ferroelectric and Piezoelectric Properties of Fine‐Grained Na0.5K0.5NbO3 Lead‐Free Piezoelectric Ceramics Prepared by Spark Plasma Sintering