Abstract:Crystallographic structure, phase transition and electrical properties of lead-free (Na0.535K0.485)1−x Li x (Nb0.942Ta0.058)O3 (x=0.042–0.098) (NKL x NT) piezoelectric ceramics were investigated. The experimental results show that both Li content and sintering temperature strongly affect the orthorhombic–tetragonal polymorphic phase boundary (PPB), which results in remarkable differences of the piezoelectric property and its temperature stability in the NKL x NT ceramics. Chemical analysis indicates that sodium volatilizes more seriously than potassium and lithium with increasing sintering temperature. Due to the comprehensively optimized effects of Li content and sintering temperature, an enhanced piezoelectric constant d 33 (276 pC/N) was obtained at room temperature in the ceramics with x=0.074 sintered at 1000°C. In the same composition, a further high d 33 up to 354 pC/N was obtained at 43°C, which is close to its T o−t temperature. Furthermore, better temperature stability can be obtained when x=0.082 sintered at 1000°C, whose piezoelectric constant d 33 (236 pC/N) keeps almost constant from room temperature to 100°C. Such a temperature-independent piezoelectric property is available in the NKL x NT ceramics with high Li content because its T o−t was moved below room temperature.

Low temperature sintering and enhanced piezoelectricity of lead-free (Na 0.52 K 0.4425 Li 0.0375)(Nb 0.86 Ta 0.06 Sb 0.08) O 3 ceramics prepared from nano-powders

Low‐Temperature Sintering of Li‐Modified (K, Na)NbO3 Lead‐Free Ceramics: Sintering Behavior, Microstructure, and Electrical Properties

Low-Temperature Sintering of ZnO and B<sub>2</sub>O<sub>3</sub> Co-Doped (K<sub>0.5</sub>Na<sub>0.5</sub>)NbO<sub>3</sub> Lead-Free Piezoelectric Ceramics

Enhanced Dielectric and Piezoelectric Properties in Li/Sb-modified (na, K)NbO3 Ceramics by Optimizing Sintering Temperature

Electrical Performance and Conduction Mechanism of Potassium Sodium Niobate-Based Lead-Free Piezoceramics Via Two-Step Sintering Route

Influence of sintering temperature on electrical properties of (K0.4425Na0.52Li0.0375)(Nb0.8825Sb0.07Ta0.0475)O3 ceramics without phase transition induced by sintering temperature

Piezoelectric Properties of Low-Temperature Sintered Li-Modified (na, K)Nbo3 Lead-Free Ceramics

Low‐Temperature Sintering of CuO‐Doped 0.94(k0.48na0.535)nbo3–0.06linbo3lead‐free Piezoelectric Ceramics

Effects of the Co-Addition of Li, Sb, Ta on the Phase Structure and Piezoelectric Properties of (Na, K) NbO3 Lead Free Piezoceramics

Influences of Sintering Temperature on Piezoelectric, Dielectric and Ferroelectric Properties of Li/Ta-Codoped Lead-Free (Na,K)NbO<sub>3</sub> Ceramics

Low-Temperature Sintering of ZnO and B2O3 Co-Doped (k0.5na0.5)nbo3 Lead-Free Piezoelectric Ceramics

Low-Temperature Sintering and Enhanced Piezoelectric Properties in Knn-Lts Nanopowder Prepared Via A Low-Cost Water-Based Sol-Gel Method

Effect of Sintering Temperature on Electrical Properties of Na0.5K0.5NbO3Lead-Free Piezoelectric Ceramics Prepared by Normal Sintering

Preparation and Properties of (na_0.48k_0.52)_0.96li_0.04(nb_0.86ta_0.08sb_0.06)o_3 Lead-Free Piezoelectric Ceramics

Two-step sintering and electrical properties of sol–gel derived 0.94(Bi<sub>0.5</sub>Na<sub>0.5</sub>)TiO<sub>3</sub>–0.06BaTiO<sub>3</sub> lead-free ceramics

Sintering properties of K_(0.5)Na_(0.5)NbO_3 lead-free piezoelectric ceramics

Enhanced Dielectric and Piezoelectric Properties in Litao3-Doped Lead-Free (k,na)nbo3 Ceramics by Optimizing Sintering Temperature

The phase structure and electric properties of low-temperature sintered (K, Na)NbO3-based piezoceramics modified by CuO

Normal Sintering of (K, Na)Nbo3-Based Lead-Free Piezoelectric Ceramics

Combined Effects of Li Content and Sintering Temperature on Polymorphic Phase Boundary and Electrical Properties of Li/Ta Co-Doped (na, K)NbO 3 Lead-Free Piezoceramics

Ferroelectric and Piezoelectric Properties of 0.95(na0.49k0.49li0.02)(nb0.8ta0.2)o3–0.05cazro3 Lead-Free Ceramics Prepared by Spark Plasma Sintering