Abstract:Crystallographic structure, phase transition and electrical properties of lead-free (Na0.535K0.485)1−x Li x (Nb0.942Ta0.058)O3 (x=0.042–0.098) (NKL x NT) piezoelectric ceramics were investigated. The experimental results show that both Li content and sintering temperature strongly affect the orthorhombic–tetragonal polymorphic phase boundary (PPB), which results in remarkable differences of the piezoelectric property and its temperature stability in the NKL x NT ceramics. Chemical analysis indicates that sodium volatilizes more seriously than potassium and lithium with increasing sintering temperature. Due to the comprehensively optimized effects of Li content and sintering temperature, an enhanced piezoelectric constant d 33 (276 pC/N) was obtained at room temperature in the ceramics with x=0.074 sintered at 1000°C. In the same composition, a further high d 33 up to 354 pC/N was obtained at 43°C, which is close to its T o−t temperature. Furthermore, better temperature stability can be obtained when x=0.082 sintered at 1000°C, whose piezoelectric constant d 33 (236 pC/N) keeps almost constant from room temperature to 100°C. Such a temperature-independent piezoelectric property is available in the NKL x NT ceramics with high Li content because its T o−t was moved below room temperature.

Preparation and Properties of (na_0.48k_0.52)_0.96li_0.04(nb_0.86ta_0.08sb_0.06)o_3 Lead-Free Piezoelectric Ceramics

Effects of Na Excess on the Preparation and Characterization of (K0.5na0.5)nbo3ceramics

Piezoelectric Properties of (K0.44 Na0.52 Li0.04)(Nb0.86 Ta0.10 Sb0.04)O3 Ceramics

Phase Transition Behavior and Electrical Properties of Lead-Free (1−x)(0.98k0.5na0.5nbo3–0.02litao3)–x(0.96bi0.5na0.5tio3–0.04batio3) Piezoelectric Ceramics

Electrical Performance and Conduction Mechanism of Potassium Sodium Niobate-Based Lead-Free Piezoceramics Via Two-Step Sintering Route

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

Combined Effects of Li Content and Sintering Temperature on Polymorphic Phase Boundary and Electrical Properties of Li/Ta Co-Doped (na, K)NbO 3 Lead-Free Piezoceramics

Phase Structure and Electrical Properties of Lead-Free (0.96Bi_(0.5)Na_(0.5)TiO_3~-0.04BaTiO_3)-(0.98K_(0.5)Na_(0.5)NbO_3~-0.02LiTaO_3) Piezoelectric Ceramics

Influence of sintering temperature on electrical properties of (K0.4425Na0.52Li0.0375)(Nb0.8825Sb0.07Ta0.0475)O3 ceramics without phase transition induced by sintering temperature

Phase Transition Behavior and Electrical Properties of (1 − X)bi0.5na0.5tio3–x(na0.53k0.44li0.04)(nb0.88sb0.08ta0.04)o3 Lead-Free Ceramics

Influence of Sintering Temperature on Grain Growth and Phase Structure of Compositionally Optimized High‐Performance Li/Ta‐Modified (na,k)nbo3 Ceramics

Preparation and Properties of （Na0.50＋xk0.50-2Xlix）nb0.9ta0.1o3 Lead-Free Piezoelectric Ceramics by Sol-Gel Method

Low temperature sintering and enhanced piezoelectricity of lead-free (Na 0.52 K 0.4425 Li 0.0375)(Nb 0.86 Ta 0.06 Sb 0.08) O 3 ceramics prepared from nano-powders

Enhanced Dielectric and Piezoelectric Properties in Li/Sb-modified (na, K)NbO3 Ceramics by Optimizing Sintering Temperature

Piezoelectric Properties and Diffusion Phase Transition Around Ppt of La-Doped (na0.52k0.44li0.04) Nb0.8ta0.2o3 Lead-Free Piezoelectric Ceramics

Electrical and Mechanical Properties of Fine‐Grained Li/Ta‐Modified (na,k)nbo3‐based Piezoceramics Prepared by Spark Plasma Sintering

Piezoelectric and dielectric properties of (Na0.5K 0.5)NbO3-Bi0.5(Na0.8K 0.2)0.5TiO3 lead-free ceramics

Microstructure and Electrical Properties of 0.95(K0.5Na0.5)NbO3-0.05Li(Nb0.5Sb0.5)O-3 Ceramics

Preparation and properties of (Na 0.5+xK 0.5-2xLi x) Nb 0.9Ta 0.1O 3 lead-free piezoelectric ceramics by sol-gel method

Normal sintering of (K0.5Na0.5)NbO3-LiNbO3 lead-free-piezoceramics and its electrical properties

Electrical Properties Of K0.5na0.5nbo3 Lead-Free Piezoceramics By Pressureless Sintering