Abstract:One of the key remaining challenges for the most promising Pb-free (K, Na) NbO3 (KNN) piezoelectrics is how to improve the temperature stability of piezoelectric voltage coefficients, which is vital to promoting their practical applications. This study proposes an effective approach to develop highly piezoelectric KNN-based ceramics with temperature-insensitive piezoelectric voltage coefficients (d(33)), which is also called direct piezo-coefficient, by broadening the boundaries from tetragonal to orthorhombic and then to rhombohedral phases. The Li-doped KNN ceramics modified with BaZrO3 and (Bi, Zr)TiO3 exhibit a high d(33) up to 330 pC N-1, whose variation is limited to +/- 10% in a common application temperature range (25-100 degrees C), when their composition is optimized for strengthening their temperature stability. A high d(33) up to 380 pC N-1 with a larger variation (<20%) but in a wider temperature range (25-200 degrees C) was also available in the present materials possessing a large planar electromechanical coupling coefficient k(p) up to 0.54 and a high Curie temperature of 4260 degrees C as well as high strength associated with high relative density. Piezoelectric force microscopy (PFM) studies reveal that the good piezoelectric response could be related to the easier domain reorientation and domain wall motion. The present results validated that our approach based on phase transition boundary engineering should be an effective strategy for further development of high-performance lead-free piezoceramics towards the demand for industrial applications.

Phase Transition Characteristics and Piezoelectric Properties of Compositionally Optimized Alkaline Niobate Based Ceramics

Phase Transition and Domain Variation Contributions to Piezoelectric Properties of Alkaline Niobate Based Lead-Free Systems

Phase Transition and Piezoelectric Properties of Alkali Niobate Ceramics Through Composition Tuning

Phase Transition and Electrical Properties of Li-And Ta-Substituted (Na0.52k0.48)(nb0.96sb0.04)o-3 Piezoelectric Ceramics

Electrical Performance and Conduction Mechanism of Potassium Sodium Niobate-Based Lead-Free Piezoceramics Via Two-Step Sintering Route

Influence of sintering temperature on electrical properties of (K0.4425Na0.52Li0.0375)(Nb0.8825Sb0.07Ta0.0475)O3 ceramics without phase transition induced by sintering temperature

Polymorphic Phase Transition And Enhanced Piezoelectric Properties Of Litao3-Modified (Na0.52k0.48) (Nb0.93sb0.07)O-3 Lead-Free Ceramics

Phase transition characteristics and associated piezoelectricity of potassium-sodium niobate lead-free ceramics

Polymorphic phase transition and enhanced piezoelectric properties of LiTaO<sub>3</sub>-modified (Na<sub>0.52</sub>K<sub>0.48</sub>) (Nb<sub>0.93</sub>Sb<sub>0.07</sub>)O<sub>3</sub>lead-free ceramics

Niobate-based lead-free piezoceramics: a diffused phase transition boundary leading to temperature-insensitive high piezoelectric voltage coefficients

Phase Transition and Electrical Properties of Lead Free (na0.5k0.5)nbo3–bialo3 Ceramics

Phase Transitional Behavior and Piezoelectric Properties of Lead‐Free (na0.5k0.5)nbo3–(bi0.5k0.5)tio3 Ceramics

Phase Transition Behavior and Electrical Properties of Lead-Free (1−x)(0.98k0.5na0.5nbo3–0.02litao3)–x(0.96bi0.5na0.5tio3–0.04batio3) Piezoelectric Ceramics

Giant Piezoelectricity And High Curie Temperature In Nanostructured Alkali Niobate Lead-Free Piezoceramics Through Phase Coexistence

Phase Transition Behavior and Electrical Properties of (1 − X)bi0.5na0.5tio3–x(na0.53k0.44li0.04)(nb0.88sb0.08ta0.04)o3 Lead-Free Ceramics

Piezoelectric and dielectric properties of Lix(K0.46Na0.54)1-xNb0.86Ta0.1Sb0.04O3 lead-free ceramics

Diffuse phase transition and electrical properties of lead-free piezoelectric (LixNa1-x)NbO3 (0.04 to x to 0.20) ceramics near morphotropic phase boundary

Influences of Sintering Temperature on Piezoelectric, Dielectric and Ferroelectric Properties of Li/Ta-Codoped Lead-Free (Na,K)NbO<sub>3</sub> Ceramics

Phase Characteristics and Piezoelectric Properties in the Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-BaTiO<sub>3</sub>-K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>System

Enhanced Dielectric and Piezoelectric Properties in Litao3-Doped Lead-Free (k,na)nbo3 Ceramics by Optimizing Sintering Temperature

Enhancing Temperature Stability in Potassium-Sodium Niobate Ceramics Through Phase Boundary and Composition Design