Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Novel 1–3 (K,Na)NbO3-based ceramic/epoxy composites with large thickness-mode electromechanical coupling coefficient and good temperature stability

New K0.48Na0.52NbO3–Bi(Zn0.5Zr0.5)O3 Lead-Free Ceramics: Microstructure and Piezoelectricity

High-Performance 0-3 Type Niobate-Based Lead-Free Piezoelectric Composite Ceramics with ZnO Inclusions.

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

Fabrication and Electrical Properties of Fine-Scale 1–3 Piezoceramic/Epoxy Composites Using (K,na)nbo3-Based Lead-Free Ceramics

Preparation and simulation of lead free NBBT/epoxy 1–3 piezoelectric composites for high frequency medical ultrasound

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Enhanced electrical properties in KNN-based ternary ceramics with high Curie temperature

A high temperature stable piezoelectric strain of KNN-based ceramics

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Design and Fabrication of Annular-Array Ultrasound Transducer Based (K, Na) NbO3 Lead-Free 1–3 Piezoelectric Composite

Excellent strain properties in (K,Na)NbO 3 -based piezoceramics induced by lamination composite strategy

Excellent Strain Properties in (K,na)nbo3-Based Piezoceramics Induced by Lamination Composite Strategy

Piezoelectric and Dielectric Properties of (Na<sub>0.5</sub>K<sub>0.5</sub>)NbO<sub>3</sub>–(Bi<sub>0.5</sub>Na<sub>0.5</sub>)<sub>0.94</sub>Ba<sub>0.06</sub>TiO<sub>3</sub>Lead-Free Piezoelectric Ceramics

Dice-and-fill Processing and Characterization of Microscale and High-Aspect-ratio (K, Na)NbO3-based 1–3 Lead-Free Piezoelectric Composites

Investigation of High Piezoelectric Properties of KNNSb-SrxBNZ Ceramics

Phase transition, microstructure and electrical properties of K1‐xNaxNbO3‐based ceramic sintered in reducing atmosphere

New 1-3 type piezoelectric composite material for kilohertz frequency range transducers

Improving the piezoelectric strain and anti-reduction properties of K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub>-based ceramics sintered in a reducing atmosphere

Enhanced Piezoelectric Properties and Thermal Stability in the (K0.5Na0.5)NbO3:ZnO Lead‐Free Piezoelectric Composites

High-performance potassium sodium niobate piezoceramics for ultrasonic transducer