Abstract:With the increase of magnetic storage density, the thickness of the protective diamond like carbon (DLC) film on the surfaces of head and disk is required as thin as possible. In this paper, the structure, mechanical properties and corrosion and oxidation resistance of ultra-thin DLC films are investigated. The ultra-thin DLC films were deposited by using filtered cathodic vacuum arc (FCVA) technique. The exact thickness of the ultra-thin DLC film was determined by high resolution transmission electron microscope (HRTEM). Raman analysis indicates that the ultra-thin DLC film presents ta-C structure with high sp3 fraction. In the wear test, a diamond tip was used to simulate a single-asperity contact with the film surface and the wear marks were produced on the film surface. The wear depths decrease with film thickness increasing. If the film thickness was 1.4nm or above, the wear depth was much lower than that of Si substrate. This indicates that the ultra-thin DLC film with thickness of 1.4nm shows excellent wear resistance. Corrosion tests in water and oxidation tests in air were carried out to investigate the diffusion barrier effect of the ultra-thin DLC films. The results show that the DLC film with thickness of 1.4nm provides adequate coverage on the substrate and has good corrosion and oxidation resistance.

Effect of Thickness on Structures of Ultrathin Diamond-Like Carbon Films

Thickness dependence of the structure of diamond-like carbon films by Raman spectroscopy

Optical Quantum-Size Effects in Diamond-Like Carbon Superlattice Structures

Molecular Dynamics Simulation of the Growth and Structural Properties of Ultra-Thin Diamond-Like Carbon Films

Effect of the thickness on electrical resistance of thin diamond-like carbon coatings on silicon substrate

Effect of the temperature on diamond-like carbon (DLC) thin film based on LIS

Tribological Properties of Diamond-Like Carbon Films Deposited by Pulsed Laser Arc Deposition

Fatigue and Frictional Behavior of Diamond-like Carbon Films Deposited by Filtered Cathodic Vacuum Arc Technique

Dependence of Optimum Thickness of Ultrathin Diamond-like Carbon Coatings over Carbon Nanotubes on Geometric Field Enhancement Factor

Effect of Substrate Morphology on the Roughness Evolution of Ultra Thin DLC Films

Thermal Conductive Performance of Deposited Amorphous Carbonmaterials by Molecular Dynamics Simulation

The Protective Properties of Ultra-Thin Diamond Like Carbon Films for High Density Magnetic Storage Devices

Structure and Optical Characteristics of DLC Films

Diamond-Like Carbon Thin Films Deposited On Ti6al4v Alloy Surface By Plasma Gun At Atmospheric Pressure

Microstructural And Stress Properties Of Ultrathin Diamond-Like Carbon Films During Growth: Molecular Dynamics Simulations

The Optical Properties of Band-Gap-modulated Diamond-Like Carbon Thin Films

Electronic-Properties of Semiconducting Diamond-Like Carbon Diamond

Application of x-ray energy dispersive spectroscopy to analyzing the thickness of diamond-like carbon film deposited on the surface of microparticles

Growth of ultrathin diamond-like carbon films by C60 cluster assembly: Molecular dynamics simulations

Mechanical properties and Raman characterization of amorphous diamond films as a function of film thickness

Film Thickness Effects on Mechanical and Tribological Properties of Nitrogenated Diamond-Like Carbon Films