Abstract:A tribo-oxide layer is generally formed on the contact surfaces during the high temperature friction and wear process, which significantly influences the tribological properties of the materials. In this work, the evolution mechanism of tribo-oxide layer for nickel-based superalloy was studied. High temperature sliding wear tests were performed at the different sliding time from 1 min to 60 min for nickel-based superalloy (Ni-16Cr-13Co-4Mo) against a Si3N4 ball at 800°C under ambient environment. Morphology and chemical composition of the worn surface and wear debris were investigated using a Scanning electron microscope (SEM), X-Ray diffraction (XRD) and Raman spectroscope. The cross-sectional microstructure and element distribution of the worn surface and untested area were characterized by EDS mapping attached to the SEM. Results show that the evolution of tribo-oxide layer can be divided into three stages. The first stage is characterized by the formation of a mixed oxide layer due to the preferential oxidation of Cr, Al and Ti in the preheating and temperature holding process. In the second stage, a dense tribo-oxide layer is formed by compacting and sintering the wear debris retained on the worn surface accompanying the inner oxidation of the dissolved γ' phase and Cr in the alloy. In the third stage, the oxide layer with a layered structure formed with an outmost layer composed of mixed oxides with a spinel structure and an inner oxide layer played a barrier role to prevent further oxidation of the substrate. It is speculated that the change in the structure of spinel oxides at high temperature from order to disorder led to the decrease in shear stress, eventually resulted in the reduction of friction coefficient and the low wear rate.

The evolution mechanism of tribo-oxide layer during high temperature dry sliding wear for nickel-based superalloy

Tribo-induced surface structure of Nickel-based superalloy at elevated temperature

A comparative study of the differences in microstructure and properties of tribo-layers of DD5 nickel-based single-crystal superalloys caused by external heat and friction heat in dry sliding wear

Tribological Behaviors and Microstructure Evolution of Inconel 718 Superalloy at Mid-High Temperature

Tribo-layer and Its Role in Dry Sliding Wear of Ti–6Al–4V Alloy

Effects of normal load and velocity on the dry sliding tribological behaviour of CoCrFeNiMo0.2 high entropy alloy

High-Temperature Friction and Wear Features of Nickel-Based Single Crystal Superalloy

Sliding Wear-Induced Compositional Lamination in a VCoNi Alloy at Elevated Temperatures, and Its Implications for Reduced Friction and Wear

High temperature tribological behaviors and wear mechanisms of NiAl-MoO3/CuO composite coatings

Sliding Wear of Nanocrystalline Nb-Ag at Elevated Temperatures: Evolution of Subsurface Microstructure and Its Correlation with Wear Performance

Molecular Dynamics Study on Nano-Friction and Wear Mechanism of Nickel-Based Polycrystalline Superalloy Coating

FRICTION AND WEAR OF AL(2)O(3)-NI COMPOSITE

Accelerated Formation of Tribo-oxide Layer and Its Effect on Sliding Wear of a Titanium Alloy

A novel wear-resistant Ni-based superalloy via high Cr-induced subsurface nanotwins and heterogeneous composite glaze layer at elevated temperatures

Effect of the Micro-Structure Evolution of Friction Layer on the Sliding Tribology Behavior of TiAl-10 Wt.% Ag at 16 N-0.5 M/s

Formation and wear mechanism of tribo-oxides and the regime of oxidational wear of steel

Effects of temperature and microstructure on the triblogical properties of CoCrFeNiNbx eutectic high entropy alloys

High temperature tribological performance of nickel-based composite coatings by incorporating multiple oxides (TiO2–ZnO–MoO3)

Influence of Residual Stress on the High-Temperature Tribological Performance of Nickel-Based Superalloy

Effects of Tribo-Film on Wear Resistance of Additive Manufactured Cobalt-Based Alloys During the Sliding Process

Study on nanoscale friction and wear mechanism of nickel-based single crystal superalloy by molecular dynamics simulations