Abstract:A tribo-oxide layer is generally formed on the contact surfaces during the high temperature friction and wear process, which significantly influences the tribological properties of the materials. In this work, the evolution mechanism of tribo-oxide layer for nickel-based superalloy was studied. High temperature sliding wear tests were performed at the different sliding time from 1 min to 60 min for nickel-based superalloy (Ni-16Cr-13Co-4Mo) against a Si3N4 ball at 800°C under ambient environment. Morphology and chemical composition of the worn surface and wear debris were investigated using a Scanning electron microscope (SEM), X-Ray diffraction (XRD) and Raman spectroscope. The cross-sectional microstructure and element distribution of the worn surface and untested area were characterized by EDS mapping attached to the SEM. Results show that the evolution of tribo-oxide layer can be divided into three stages. The first stage is characterized by the formation of a mixed oxide layer due to the preferential oxidation of Cr, Al and Ti in the preheating and temperature holding process. In the second stage, a dense tribo-oxide layer is formed by compacting and sintering the wear debris retained on the worn surface accompanying the inner oxidation of the dissolved γ' phase and Cr in the alloy. In the third stage, the oxide layer with a layered structure formed with an outmost layer composed of mixed oxides with a spinel structure and an inner oxide layer played a barrier role to prevent further oxidation of the substrate. It is speculated that the change in the structure of spinel oxides at high temperature from order to disorder led to the decrease in shear stress, eventually resulted in the reduction of friction coefficient and the low wear rate.

Study on nanoscale friction and wear mechanism of nickel-based single crystal superalloy by molecular dynamics simulations

Molecular Dynamics Study on Nano-Friction and Wear Mechanism of Nickel-Based Polycrystalline Superalloy Coating

High-Temperature Friction and Wear Features of Nickel-Based Single Crystal Superalloy

Atomic-scale study of linear reciprocating friction of TCP/γ phase in nickel-based single crystal alloy

Nano-cutting deformation characteristics and atomic-scale behavior of two-phase γ/γ′ nickel-based single crystal superalloy

Atomic behavior of nickel-based single crystal superalloy during heat treatment process based on molecular dynamics

A review of the tribology of nickel‐based superalloys

Wear mechanism, subsurface structure and nanomechanical properties of additive manufactured Inconel nickel (IN718) alloy

Molecular dynamics study of the repetitive friction mechanism of nickel-based single crystals in an aqueous environment

Fatigue Fracture Mechanism of a Nickel-Based Single Crystal Superalloy with Partially Recrystallized Grains at 550 C by In Situ SEM Studies

The evolution mechanism of tribo-oxide layer during high temperature dry sliding wear for nickel-based superalloy

Evolution of fatigue mechanical properties and micro defects in nickel-based single crystal superalloys: A molecular dynamics research

Influence of enhanced Laves phase shape and distribution on atomic-scale frictional wear mechanisms in nickel-based single crystal alloys

Study on the Nano-Friction Behavior of Nickel-Based Ag Film Composites Based on Molecular Dynamics

Study of Nanoscale Wear of SiC/Al Nanocomposites Using Molecular Dynamics Simulations

Molecular dynamics study of fatigue mechanical properties and microstructural evolution of Ni-based single crystal superalloys under cyclic loading

Grinding surface and subsurface stress load of nickel-based single crystal superalloy DD5

Micro Defects Evolution of Nickel-Based Single Crystal Superalloys during Shear Deformation: A Molecular Dynamics Study

In-situ SEM study on fatigue crack behavior of a nickel-based single crystal alloy at 950 °C and 1050 °C

Tribological behaviors of nanotwinned Al alloys

Influence of Residual Stress on the High-Temperature Tribological Performance of Nickel-Based Superalloy