Abstract:A tribo-oxide layer is generally formed on the contact surfaces during the high temperature friction and wear process, which significantly influences the tribological properties of the materials. In this work, the evolution mechanism of tribo-oxide layer for nickel-based superalloy was studied. High temperature sliding wear tests were performed at the different sliding time from 1 min to 60 min for nickel-based superalloy (Ni-16Cr-13Co-4Mo) against a Si3N4 ball at 800°C under ambient environment. Morphology and chemical composition of the worn surface and wear debris were investigated using a Scanning electron microscope (SEM), X-Ray diffraction (XRD) and Raman spectroscope. The cross-sectional microstructure and element distribution of the worn surface and untested area were characterized by EDS mapping attached to the SEM. Results show that the evolution of tribo-oxide layer can be divided into three stages. The first stage is characterized by the formation of a mixed oxide layer due to the preferential oxidation of Cr, Al and Ti in the preheating and temperature holding process. In the second stage, a dense tribo-oxide layer is formed by compacting and sintering the wear debris retained on the worn surface accompanying the inner oxidation of the dissolved γ' phase and Cr in the alloy. In the third stage, the oxide layer with a layered structure formed with an outmost layer composed of mixed oxides with a spinel structure and an inner oxide layer played a barrier role to prevent further oxidation of the substrate. It is speculated that the change in the structure of spinel oxides at high temperature from order to disorder led to the decrease in shear stress, eventually resulted in the reduction of friction coefficient and the low wear rate.

A review of the tribology of nickel‐based superalloys

A review on tribological behavior of nickel-based Inconel superalloy

Molecular Dynamics Study on Nano-Friction and Wear Mechanism of Nickel-Based Polycrystalline Superalloy Coating

Study on nanoscale friction and wear mechanism of nickel-based single crystal superalloy by molecular dynamics simulations

Influence of Residual Stress on the High-Temperature Tribological Performance of Nickel-Based Superalloy

Insight into the Tribological Behavior of the Dual-Phase Nickel Aluminum Bronze Alloy by Multiscale Characterization

The evolution mechanism of tribo-oxide layer during high temperature dry sliding wear for nickel-based superalloy

Tribo-induced surface structure of Nickel-based superalloy at elevated temperature

High-Temperature Friction and Wear Features of Nickel-Based Single Crystal Superalloy

Review of two-dimensional nanomaterials in tribology: Recent developments, challenges and prospects

Improving tribological performance of metallic coatings: A synergy of gradient structure and solid lubricant modification

Tribological analysis and machine learning modeling of nickel-coated graphite reinforced A206 metal matrix composites

The Wear-resistance of TiNi Alloy and its Tribological Applications

A novel wear-resistant Ni-based superalloy via high Cr-induced subsurface nanotwins and heterogeneous composite glaze layer at elevated temperatures

Stress-dependent subsurface structural transformations of gradient nanograin Ti-6Al-4V alloy and its impact on wear behavior

Research on tribological properties of new Ni-based single crystal alloy containing Re

Investigation of the preparation and tribological behavior of a frictional interface covered with sinusoidal microchannels containing SnAgCu and Ti3SiC2

Wear mechanism, subsurface structure and nanomechanical properties of additive manufactured Inconel nickel (IN718) alloy

Effect of aluminum addition on microstructure, mechanical properties and high temperature tribological properties of nickel-rich NiTi alloy

The influence of microalloying and preparation process on phase transformation, mechanical properties, and friction/corrosion behavior of Cu–Ni–Sn alloys: A review

The Generation, Measurement, Prediction, and Prevention of Residual Stress in Nickel-Based Superalloys: A Review