Abstract:A tribo-oxide layer is generally formed on the contact surfaces during the high temperature friction and wear process, which significantly influences the tribological properties of the materials. In this work, the evolution mechanism of tribo-oxide layer for nickel-based superalloy was studied. High temperature sliding wear tests were performed at the different sliding time from 1 min to 60 min for nickel-based superalloy (Ni-16Cr-13Co-4Mo) against a Si3N4 ball at 800°C under ambient environment. Morphology and chemical composition of the worn surface and wear debris were investigated using a Scanning electron microscope (SEM), X-Ray diffraction (XRD) and Raman spectroscope. The cross-sectional microstructure and element distribution of the worn surface and untested area were characterized by EDS mapping attached to the SEM. Results show that the evolution of tribo-oxide layer can be divided into three stages. The first stage is characterized by the formation of a mixed oxide layer due to the preferential oxidation of Cr, Al and Ti in the preheating and temperature holding process. In the second stage, a dense tribo-oxide layer is formed by compacting and sintering the wear debris retained on the worn surface accompanying the inner oxidation of the dissolved γ' phase and Cr in the alloy. In the third stage, the oxide layer with a layered structure formed with an outmost layer composed of mixed oxides with a spinel structure and an inner oxide layer played a barrier role to prevent further oxidation of the substrate. It is speculated that the change in the structure of spinel oxides at high temperature from order to disorder led to the decrease in shear stress, eventually resulted in the reduction of friction coefficient and the low wear rate.

Study on the oxidation behaviours and the interactions between friction and oxidation of the Ni-based composites with in-situ carbides reinforcement at 800 °C

High temperature and room temperature tribological behaviors of in-situ carbides reinforced Ni-based composites by reactive sintering Ni and Ti2AlC precursor

High temperature tribological performance of nickel-based composite coatings by incorporating multiple oxides (TiO2–ZnO–MoO3)

Tribological performance and high temperature oxidation behaviour of thermal sprayed Ni- and NiCrAlY-based composite coatings

High Temperature Sliding Wear Behaviors of Ion Plating Tin Composite Coating with Ion Nitriding As Interlayer on Hot Work Die Steel

Wear Behavior of TiN/TiAlSiN Nanocomposite Multilayer Coatings from Ambient Temperature to Medium Temperature

HVOF Preparation and Cycle Oxidation Behavior at 600.DEG.C.of Nanostructured Ni60-TiB2 Composite Coating

The evolution mechanism of tribo-oxide layer during high temperature dry sliding wear for nickel-based superalloy

High temperature induced “glaze” layer formed in HVOF-sprayed NiCrWMoCuCBFe coating and its wear reduction mechanism

High-temperature oxidation and wear properties of TiC-reinforced CrMnFeCoNi high entropy alloy composite coatings produced by laser cladding

The influence of nano-CeO2 on tribological properties and microstructure evolution of Cr3C2-NiCrCoMo composite coatings at high temperature

Cycle Oxidation Behavior of Nanostructured Ni60–TiB2 Composite Coating Sprayed by HVOF Technique

Influence of Oxidation on the Structural and Mechanical Properties of TiAlSiN Coatings Synthesized by Multi-Plasma Immersion Ion Implantation and Deposition

High temperature tribological behaviors and wear mechanisms of NiAl-MoO3/CuO composite coatings

Study on the friction and wear properties of nickel-based-WC-10Ni composite coatings prepared on the surface of TC4 titanium alloy

Investigation on the effect mechanism of oxidation on the tribological performance of cast steel /copper matrix composite

Microstructural evolution during exposure in air and oxidation behavior of a nickel-based superalloy

Analysis of oxidation behavior of laser cladding SiC-Ti based composite strengthening coating

Understanding the Oxidation Behaviors of a Ni-Co-based Superalloy at Elevated Temperatures Through Multiscale Characterization

Oxidation mechanism of in-situ TiC/Ni composites at 1073 K

Thermal-mechanical driven oxidation of NiCr-Cr3C2-BaF2/CaF2 composite coating at high temperature