Abstract:A tribo-oxide layer is generally formed on the contact surfaces during the high temperature friction and wear process, which significantly influences the tribological properties of the materials. In this work, the evolution mechanism of tribo-oxide layer for nickel-based superalloy was studied. High temperature sliding wear tests were performed at the different sliding time from 1 min to 60 min for nickel-based superalloy (Ni-16Cr-13Co-4Mo) against a Si3N4 ball at 800°C under ambient environment. Morphology and chemical composition of the worn surface and wear debris were investigated using a Scanning electron microscope (SEM), X-Ray diffraction (XRD) and Raman spectroscope. The cross-sectional microstructure and element distribution of the worn surface and untested area were characterized by EDS mapping attached to the SEM. Results show that the evolution of tribo-oxide layer can be divided into three stages. The first stage is characterized by the formation of a mixed oxide layer due to the preferential oxidation of Cr, Al and Ti in the preheating and temperature holding process. In the second stage, a dense tribo-oxide layer is formed by compacting and sintering the wear debris retained on the worn surface accompanying the inner oxidation of the dissolved γ' phase and Cr in the alloy. In the third stage, the oxide layer with a layered structure formed with an outmost layer composed of mixed oxides with a spinel structure and an inner oxide layer played a barrier role to prevent further oxidation of the substrate. It is speculated that the change in the structure of spinel oxides at high temperature from order to disorder led to the decrease in shear stress, eventually resulted in the reduction of friction coefficient and the low wear rate.

Tribological Properties of γ-TiAl Alloy Fretting against Nickel-Based Superalloy at Elevated Temperature

Role of temperature in tribolayers in fretting wear of γ-TiAl alloy

Fretting wear behaviors and mechanism of a high Nb–TiAl alloy with full lamellar microstructure at ambient temperature

Fretting wear evolution of γ-TiAl alloy

Effect of aluminum addition on microstructure, mechanical properties and high temperature tribological properties of nickel-rich NiTi alloy

Tribo-induced surface structure of Nickel-based superalloy at elevated temperature

The evolution mechanism of tribo-oxide layer during high temperature dry sliding wear for nickel-based superalloy

Influence of Residual Stress on the High-Temperature Tribological Performance of Nickel-Based Superalloy

Tribological behaviors of nanotwinned Al alloys

Response of tribological behaviors to microstructural characteristics of Ti-40Al-10V alloy at high temperatures

The Relationships Between Tribological Behaviour and Heat-Transfer Capability of Ti6Al4V Alloys

High-Temperature Friction and Wear Features of Nickel-Based Single Crystal Superalloy

Wear Properties of NiAl Based Materials

Tribological Behavior of Patterned TiAlN Coatings at Elevated Temperatures

Temperature-mediated tribological characteristics of 40CrNiMoA steel and Inconel 718 alloy during sliding against Si3N4 counterparts

Fretting fatigue damage mechanism of Nickel-based single crystal superalloys at high temperature

Effects of Temperature on the Tribological Properties of NM600 under Sliding Wear

Tribology behaviors of Ti–Ni51.5 at% shape memory alloy with different microstructures and textures

Sliding and Fretting Wear Behavior of Biomedical Ultrafine-Grained TiNbZrTaFe/Si Alloys in Simulated Physiological Solution

Dry Friction Characteristics of Ti-6Al-4V Alloy under High Sliding Velocity

Study of the high-temperature mechanical properties of Al-6061/NiTi reinforced metal matrix composites