Abstract:Carbon nanotube (CNT) film can be used as thin film electrodes and wearable electronic devices due to their excellent mechanical and electrical properties. The femtosecond laser has the characteristics of an ultra-short pulse duration and an ultra-high peak power, and it is one of the most suitable methods for film material processing. The ablation and patterning of CNT film are performed by a femtosecond laser with different parameters. An ablation threshold of 25 mJ/cm2 was obtained by investigating the effects of laser pulse energy and pulse number on ablation holes. Raman spectroscopy and scanning electron microscope (SEM) were used to characterize the performance of the pattern groove. The results show that the oligomer in the CNT film was removed by the laser ablation, resulting in an increase in Raman G band intensity. As the laser increased, the ablation of the CNTs was caused by the energy of photons interacting with laser-induced thermal elasticity when the pulse energy was increased enough to destroy the carbon–carbon bonds between different carbon atoms. Impurities and amorphous carbon were found at and near the cut edge while laser cutting at high energy, and considerable distortion and tensile was produced on the edge of the CNTs’ groove. Furthermore, appropriate cutting parameters were obtained without introducing defects and damage to the substrate, which provides a practical method applied to large-area patterning machining of CNT film.

MWCNTs Patterning by Thermally Enhanced and Confined Evaporation for Transparent and Conductive Thin Film

Transferable thin films of pristine carbon nanotubes.

Ablation and Patterning of Carbon Nanotube Film by Femtosecond Laser Irradiation

Fabrication of high-resolution multiwall carbon nanotube field-emission cathodes at room temperature

Recent Progresses in Flexible Transparent Conducting Film of Carbon Nanotubes

An Etching-Free Method for Patterning Carbon Nanotube Films Enabled by Universal Wettability Modulation

Growth of spin-capable multi-walled carbon nanotubes and flexible transparent sheet films

Synthesis and Characterization of Carbon Nanotube Grown on Flexible and Conducting Carbon Fiber Sheet for Field Emitter

Transparent Micropatterned Conductive Films Based on Highly-Ordered Nanowire Network

Electrospray deposition of carbon nanotube thin films for flexible transparent electrodes

Transfer printing approach to all-carbon nanoelectronics

Controlled Growth, Patterning and Placement of Carbon Nanotube Thin Films

The fabrication of a carbon nanotube transparent conductive film by electrophoretic deposition and hot-pressing transfer

Patterning and growth of carbon nanotubes on a highly structured 3D substrate surface

Fabrication of All‐Carbon Nanotube Electronic Devices on Flexible Substrates Through CVD and Transfer Methods

High Throughput Production of Transparent Conductive Single-Walled Carbon Nanotube Films via Advanced Floating Catalyst Chemical Vapor Deposition

Dry-transferred Single-Walled Carbon Nanotube Thin Films for Flexible and Transparent Heaters

P‐1.19: Temperature‐Controlled Dip‐Coating Flexible Carbon Nanotube Thin‐Film Transistors

Multilevel, Multicomponent Microarchitectures of Vertically-Aligned Carbon Nanotubes for Diverse Applications

Fast liquid-free patterning of SWCNT films for electronic and optical applications

Plasma-jet-assisted Maskless, Erasable, Extreme Wetting-Contrast Patterning on Stretchable Carbon Nanotubes Film