Abstract:Scientific and technological advances in transparent conductive electrodes improve the heating performance of flexible transparent film heaters (TFHs), which can be utilized for various applications as defrosters and heaters. To achieve high performance as well as practical TFHs, several conditions, such as high optical transmittance, low electrical resistance, heating uniformity, and operational stability in various environmental conditions should be satisfied. However, due to the trade-offs between optical transmittance and electrical resistance, it is not easy to fulfill all the requirements concurrently. Here we report flexible TFHs using a ternary composite of silver nanowire (AgNW), conducting polymer (i.e., poly[3,4-ethylenedioxythiophene]:polystyrene sulfonate [PEDOT:PSS]), and a thin conductive oxide (i.e., indium tin oxide [ITO]) layer, exhibiting higher performance in terms of the maximum heating temperature (>110 °C), operational stability, mechanical flexibility, and optical transmittance (95% at 550 nm), compared to pristine AgNW-based TFHs. We also demonstrated the stable operation of the AgNW-PEDOT:PSS/ITO TFHs soaked in water, showing excellent environmental stability. To analyse the fundamental mechanisms for the improved performance of the AgNW-PEDOT:PSS/ITO TFHs, we investigated the progress of joule heating using a device simulator, and found that the improvement originated not only from reduced electrical resistance but also from enhanced heat dissipation with PEDOT:PSS and ITO. We anticipate that our analysis and results will be helpful for further development of practical flexible TFHs.

Dry-transferred Single-Walled Carbon Nanotube Thin Films for Flexible and Transparent Heaters

Transferable thin films of pristine carbon nanotubes.

Highly stable phosphotungstic acid/Au dual doped carbon nanotube transparent conductive films for transparent flexible heaters

The Flexible and Transparent Film Heaters Based on Regenerated Cellulose and Carbon Nanotubes

Large-Scale Preparation of Silver Nanowire-Based Flexible Transparent Film Heaters by Slot-Die Coating

Carbon nanotube-based flexible electrothermal film heaters with a high heating rate

Tannic acid modified graphene/CNT three-dimensional conductive network for preparing high-performance transparent flexible heaters

Gallic Acid-Reduced Graphene Oxide Deposited with Carbon Nanotubes for Transparent Film Heaters

Flexible transparent film heaters using a ternary composite of silver nanowire, conducting polymer, and conductive oxide

High-performance single-walled carbon nanotube transparent conducting film fabricated by using low feeding rate of ethanol solution

Highly thermal conductivity and infrared emissivity of flexible transparent film heaters utilizing silver-decorated carbon nanomaterials as fillers

Carbon Nanotube Films with Fewer Impurities and Higher Conductivity from Aqueously Mono-Dispersed Solution via Two-Step Filtration for Electric Heating

The fabrication of a carbon nanotube transparent conductive film by electrophoretic deposition and hot-pressing transfer

Laser-induced Nanoscale Thermocapillary Flow for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes.

Ultraflexible transparent conductive films based on Ag nanowires for use in quick thermal response transparent heater

Thermal Management for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes Based on Thermocapillary Flow by Pulsed Heating

Modeling of thermocapillary flow to purify single-walled carbon nanotubes

Dry and Binder-Free Deposition of Single-Walled Carbon Nanotubes on Fabrics for Thermal Regulation and Electromagnetic Interference Shielding

Flexible self-assembly carbon nanotube/polyimide thermal film endowed adjustable temperature coefficient of resistance

Single-wall carbon nanotube fiber non-woven fabrics with a high electrothermal heating response

High Throughput Production of Transparent Conductive Single-Walled Carbon Nanotube Films via Advanced Floating Catalyst Chemical Vapor Deposition