Abstract:Utilizing carbon nanotubes (CNTs) as substitutes for the conventional rigid indium-tin oxide (ITO) electrodes, all CNT based flexible field emission devices (FEDs) were possible to prepare with a novel film transfer method. In the method, both CNT-based flexible cathode and anode were fabricated by first attaching the vacuum filtered CNT film/mixed cellulose eater (MCE) filter membrane to an adhesive semi-cured poly(dimethyl siloxane) substrate, and then peeling off the MCE filter membrane. Effects of bending direction and bending radius on field emission properties were studied. The field emission performance of the convex bending device was worse than that of the flat device and deteriorated further with the decrease of bending radius. In contrast, the concave bending device exhibited better field emission properties than the flat device; nevertheless, its field emission properties decreased as the concave bending radius reduced below a certain value. The method achieved two successes. One is that the interfacial interaction between CNT films and the flexible substrate was greatly enhanced. The other is that the transfer process improved the field emission properties due to the increase of vertically aligned CNT tips. Compared with traditional methods applied in FED preparation, the novel modified transfer method is organic free, easy to control, cheap, and environment friendly.

Fabrication of high-resolution multiwall carbon nanotube field-emission cathodes at room temperature

Study of Multi-Walled Carbon Nanotube Structures Fabricated by PMMA Suspended Dispersion

Fabrication of carbon nanotube field emission film by electrophoresis deposition and sintering

Synthesis and Characterization of Carbon Nanotube Grown on Flexible and Conducting Carbon Fiber Sheet for Field Emitter

Fabrication and Characterization of Gated Carbon Nanotube Emitters in A Trench Structure

Crystalline Multiwall Carbon Nanotubes and Their Application As a Field Emission Electron Source

Mechanical Fabrication of Carbon Nanotube Films and Their Field-Emission Properties

Fabrication of Multiwalled Carbon Nanotube Bridges by Poly-Methylmethacrylate Suspended Dispersion

Fabrication Of Field Emission Cathode By Spraying Multiwalled Carbon Nanotubes On Screen Printed Substrate

Suspended Multiwalled Carbon Nanotubes As Self-Aligned Evaporation Masks.

Fabrication and electrical characteristics of carbon nanotube field emission microcathodes with an integrated gate electrode

Carbon Nanotube Displays

Growth of Aligned Multiwall Carbon Nanotubes and the Effect of Adsorbates on the Field Emission Properties

Fabrication and electrical characterization of multiwalled carbon nanotube-based circuit at room temperature

Carbon Nanotubes On Carbon Fabrics For Flexible Field Emitter Arrays

Efficient Carbon Nanotube Field Emitter Using Electrospun Carbon Nanofibers as a Flexible Electrode

Efficient Fabrication Of Field Electron Emitters From The Multiwalled Carbon Nanotube Yarns

All carbon nanotube based flexible field emission devices prepared through a film transfer method

Fabrication of Carbon Nanotube Lateral Field Emitters

Fabrication of Nitrogen-doped Multi-walled Carbon Nanotube and Their Field Effect Transistor Properties

Fabrication of Field Emission Triodes Using Carbon Nanofibers