Abstract:In order to promote the research and development on evaluating the seismic performance of structures, China State Construction Engineering Corporation (CSCEC) planned to construct a large-scale loading testing facility, the Multi-Function Testing System (MFTS). This facility can perform full-scale, real-time, 6-degree-of-freedom static and dynamic testing of rubber bearings and many types of structural components including long columns, shear walls and cross shape joints. The basic performances of the MFTS are a clearance of 9.1 m x 6.6 m x 10 m for specimen installation, maximum x-directional displacement 1500 mm, maximum y-directional velocity 1570 mm/s and maximum z-directional compressive load 108 MN. The system configuration and performance specifications of the MFTS are presented in this paper. The inverse kinematics model and the nonlinear model of the hydraulic servosystem of the MFTS are built. A modified feedback forward kinematics algorithm is developed for real-time control of the MFTS. Internal force characteristics of the loading system are analyzed. The internal force control method based on real-time solution of basis of internal force space is proposed for the system with large motion ranges. The motion controller combining position control loop and internal force control loop is developed. To meet the requirement of simultaneously imposing vertical compressive load and horizontal displacement, a mixed load and displacement controller is designed, where a direct force control loop is used to improve the response speed of the force control and reduce spatial dynamic coupling effects. Finally, a dynamic bearing testing is performed. The test results demonstrate that the system using the proposed controller has good abilities on position tracking, force balance, and load following.

Preparation of 3 MN Build-Up Force Standard Machine

Research on Multi-Parametric Coupling Design Method of Deformable Boring Bar in Embedded Giant Magnetostrictive Actuator

Experimental Study of High-Frequency Vibration Assisted Micro/Mesoscale Forming of Metallic Materials

Preparation of 50 Kn Specialized Standard Force Device at CQMQ

An New Instrument for Measuring Mechanical Compliance of Micro-Systems

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Development of a Large-scale Computer-controlledCompression-torsional Multi-axial Loading Apparatus

Long-term stability and accuracy of build-up force standard machine

Development of Atomic Level GMM Positioning/Alignment System for Driving a Gigantic Weight Spindle. Core Technology for Advanced .PHI.300mm Si Wafer Ultraprecision Machine Tool.

A piezoelectric inchworm actuator of linear type using symmetrical lever amplification

Multi-dimensional force tracking-loading simulator development and simulation experiment for five-axis machining center

Design and Testing of a Novel Nested, Compliant, Constant-Force Mechanism with Millimeter-Scale Strokes

Development and test of a high speed pusher-type inchworm piezoelectric actuator with asymmetric driving and clamping configuration

A Single-Clamp Inchworm Actuator with Two Piezoelectric Stacks

A Purely Centered and Non-Redundant Piezoelectric Stick-Slip Rotary Stage with Force Amplification

Research on High-Precision Measurement Method for Small-Size Gears with Small-Modulus

Axially Movable Electromagnetic Forming System for Large-Scale Metallic Sheet

Modeling and Control of the CSCEC Multi-Function Testing System

Design and test of a compact large-stroke dual-drive linear-motion system

Design, Modeling, and Testing of a Long-Stroke Fast Tool Servo Based on Corrugated Flexure Units

A precision CNC turn-mill machining center with gear hobbing capability