Abstract:In substructure hybrid tests, imposing realistic multi-degree-of-freedom (MDOF) displacement and force boundary conditions on a specimen involves controlling several actuators to emulate the MDOF boundary conditions of the experimental substructure. This setup presents significant challenges for decoupling control in MDOF systems. Due to the typically high stiffness of the specimen in the axial direction, force control is preferred over displacement control, which has limited accuracy in this direction. Typically, force control in the axial direction is combined with simultaneous displacement control in the softer direction, forming an MDOF force-displacement mixed control scheme. This scheme transforms force control into displacement control in the inner loop in the axial direction to ensure safe loading. The scheme involves addressing two major challenges: the nonlinear force–displacement transformation and the nonlinear coordinate transformation from the local actuator space (LAS) to the global Cartesian coordinate (GCC) system. To address these challenges, the Modified Newton–Raphson iteration integrated with proportional integral plus feed-forward (MNR-PIFF) and incremental kinematic transformation integrated with proportional integral plus feed-forward (IKT-PIFF) methods are proposed. Based on these methods, a novel MDOF force–displacement mixed control (NMFDC) framework is developed for substructure hybrid testing. A 6-DOF cyclic test simulation using the NMFDC framework was conducted to demonstrate its superiority. Furthermore, a 6-DOF cyclic test and substructure hybrid test at low loading rates were performed to validate the NMFDC framework because of the loading equipment limit. Experimental results and numerical simulations indicate that the NMFDC framework achieves swifter response with lower error levels. For applications in fast and real-time hybrid testing, dynamic loading equipment need to be used, the PIFF controller in the NMFDC framework should be replaced by adaptive time delay compensation in future developments.

Preparation of 50 Kn Specialized Standard Force Device at CQMQ

Development of tower crane model dead-load test device in structural design competition

Development of Centrifuge for Multi-Parameter Combined Environmental Test

Multi-actuated Mechanism Design Considering Structure Flexibility Using Correlated Performance Reinforcing

Preparation of 3 MN Build-Up Force Standard Machine

The Device for Calibration Based on the Six-freedom of Generalized Force

An New Instrument for Measuring Mechanical Compliance of Micro-Systems

Multifunctional In-Situ Testing Device for Investigating the Service Performance of Materials

Specialized Equipment for Crane Scale on Metrology Testing

Design and Realization of 108MN Multi-function Testing System

Modeling and Control of the CSCEC Multi-Function Testing System

Design and Implementation of Testing Device for Damping Oil Bulk Modulus and Fatigue Characteristic

Development and testing of a stationary dynamometer using cross-beam-type force-sensing elements for three-axis cutting force measurement in milling operations

Design and Testing of a Novel Nested, Compliant, Constant-Force Mechanism with Millimeter-Scale Strokes

Non-contact ultra-precision metrology of superfine cylinders with a developed two-dimensional coordinate measuring device

Novel Instrument for Characterizing Comprehensive Physical Properties under Multi-Mechanical Loads and Multi-Physical Field Coupling Conditions.

Novel multi-degree-of-freedom force–displacement mixed control framework for low loading rate substructure hybrid testing

A novel technique of microforce sensing and loading

A Miniaturized Device Coupled with Digital Image Correlation for Mechanical Testing

Development of Elastic Diaphragm Structure for Ultra-low Stiffness Probe and Mechanical Properties Testing Method

Development of a Shear-Type Dynamometer for High-Temperature Environment