Abstract:This paper reports a new stick-slip piezoelectric linear actuator with large load density, compact size, and high resolution. It is devised using a dual-arch bridge-type driving mechanism (DBDM) and an integrated elliptical preload mechanism(IEPM). The DBDM can generate a coupling motion on the driving point, which provides clamping and releasing actions during stick-slip motion. Also, the DBDM can magnify the clamping force with large amplification ratios, thus improving driving force and load-carrying capacity. The IEPM uses compact flexure hinges to adjust preload force, reducing structural dimension. Then, theoretical analysis and simulations are conducted, and a prototype is fabricated. A modified driving voltage with smooth turning points is designed to improve motion properties further. Experiments show that load density is 0.037 g/mm $^{\mathbf{3}}$ under the driving voltage of 100 V. The actuator has an overall size of 33.6 mm $\times$ 20 mm $\times$ 8 mm and a displacement resolution of 22 nm. Note to Practitioners —Most research on linear actuators focused on motion displacement improvement, and more research needs to be done on improving load-carrying capacity. Therefore, this paper designs a force amplification linear actuator with a compact structure using the DBDM. In the experimental stage, the sudden change of the driving signal affects the output performance, and a modified sawtooth voltage is used to improve the output speed and load-carrying capacity. The experimental results show that under the modified sawtooth wave voltage, the maximum speed of the slider is 1.4 mm/s, and the speed is increased by 17% compared with the traditional wave. When a 200 g load is applied to the slider, the linear actuator operates at a stable speed of 1.2 $\mu $ m/s, 33% faster than conventional sawtooth waves. As a result, the designed actuator has superior performance at higher loads.

A Purely Centered and Non-Redundant Piezoelectric Stick-Slip Rotary Stage with Force Amplification

Design And Analysis Of Two Dimensional X-Y Micropositioning Stage

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

A piezodriven three dimensional micropositioning stage for nano-manufacturing

A Decoupled Flexure-Based Rotary Micropositioning Stage with Compact Size

A Novel Hybrid Actuation Mechanism Based XY Nanopositioning Stage with Totally Decoupled Kinematics

Design, modeling, and analysis of a new XYθ piezoelectric microstage featuring high amplification ratios and multiple actuation modes

Design, Analysis and Experimental Performance of a Novel Stick-Slip Type Piezoelectric Rotary Actuator Based on Variable Force Couple Driving

A novel stick-slip piezoelectric rotary actuator designed by employing a centrosymmetric flexure hinge mechanism

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Design of a Linear Walking Stage Based on Two Types of Piezoelectric Actuators

A Novel Cross-Scale Nanopositioning Stage Based on Dual Piezoelectric Stick-Slip Actuation with a Shared Flexible Hinge

Design and Analysis of a New Flexure-Based XY Stage

A New Stick-Slip Piezoelectric Actuator Using Dual-Arch Bridge-Type Compliant Mechanisms

A Non-Redundant Piezoelectric Center-Rotation Platform with a Single-Layer Structure and a Large Working Range

A Novel Compact Compliant Bridge Type Micro-positioning Stage with a Large Displacement Amplification Ratio

Design and Locomotion Study of Stick-Slip Piezoelectric Actuator Using Two-Stage Flexible Hinge Structure

Modeling and Experimental Evaluations of a Four-Legged Stepper Rotary Precision Piezoelectric Stage

Design and Performance Testing of a New Type Piezoelectric Rotary Actuator

Design of a linear-rotary micro-stage

A Novel Linear-Rotary Piezoelectric Positioning Stage Based on Surface's Rectangular Trajectory Driving