Abstract:When unbalanced insulation is applied to double circuit transmission lines on the same tower,the minimum degree of insulation unbalancedness,by which the lower insulation level is configured at one of the double circuit transmission lines to ensure that the phase-to-phase flashover always occurs at the side with the lower insulation level,is analyzed by electromagnetic transient program(EMTP),and a corresponding insulation configuration scheme is provided.When the balanced insulation or the insulation with low unbalancedness is adopted to double circuit transmission lines on the same tower,the inter-circuit flashover caused by lightning stroke usually happens,namely there is a single-phase flashover in each circuit,however along with the extension of the difference in insulation levels for the two circuits,the inter-circuit flashover gradually turns to phase-to-phase flashover happening at the circuit with the lower insulation level.Based on this principle and by means of ensuring enough difference between insulation levels for the two circuits,it can make sure that when double circuit transmission lines on the same tower is lightning-stricken the phase-to-phase flashover only happens at the circuit with the lower insulation level,therefore the serious fault of simultaneous trip-out of two circuits can be avoided at the cost of trip-out of one circuit.Calculation results show that when the degree of insulation unbalancedness for double 220 kV or 110 kV circuit transmission lines on the same tower reaches to 30%,or in other word,the difference in insulator pieces of a string between two 220 kV circuits or two 110 kV circuits is 4 or 3 pieces respectively,the unbalanced insulation can restrict the circuit,where phase-to-phase flashover happens.Besides,the effect of such a measure is reliable and suitable for double circuit transmission lines on the same tower with various conductor arrangements of phase sequence to avoid simultaneous trip-out of both circuits for double circuit transmission lines on the same tower due to lightning stroke.

Analysis on Zero Sequence Current Distribution Characteristic of Grounding Faults Occurred in Double-Circuit Transmission Lines on the Same Tower

Impact of zero-sequence mutual inductance in UHV Anhui-to-east power transfer lines on phase-earth distance protection

Analysis of Ground Distance Protection for Quadruple-Circuit Transmission Lines on the Same Tower

Research on Influence of Zero-sequence Mutual Inductance to Zero Sequence Current on Common-tower Double-transmission Line with Simple Fault

Characteristic Analysis on Longitudinal Fault of Dual-Circuit Transmission Line and Improvement of Zero-Sequence Directional Protection

Lightning Performance of Quadruple-circuit Transmission Line with Dual Voltage 500/220 Kv on the Same Tower

Application of Unbalanced Insulation in 220 Kv and 110 Kv Double-Circuit Transmission Lines on the Same Tower

Calculation and Analysis on Induced Voltage and Current of 1 000 Kv Transmission Line Adopting Structure of Double Circuit on the Same Tower

Research on Power Frequency Over-Voltage in UHV AC Transmission Lines

Simulated Calculation and Analysis of Lightning Performance of UHV A.C. Transmission Line

Comparative Research on Z-Type Tower and Traditional T-Type Tower for UHVDC Transmission Lines Located at Mountain Areas

Influence of Mutual Inductance to the Distance Protection of Quadruple-Lines on the Single Tower and the Solution

Influence of zero-sequence mutual inductance of transmission lines of the same passage on equivalent zero-sequence impedance

Analysis Of Pilot Zero-Sequence Directional Protection Mal-Function In Double-Circuit Lines Break-Conductor Fault And Solutions

Analysis on the weak current and strong magnetic problem of north-west 330 kV lines and its countermeasure

Impact of Zero-Sequence Mutual Inductance on Underreach Distance Protection and an Adaptive Solution

Analysis on Protection Actions of Zero-sequence Direction Relay for Double-parallel Lines with Different Voltage Level

Research on Two Stage Zero Sequence Inverse Time Current Protection and Its Setting Method

Simulation and analysis of induced voltage and induced current on overhead ground wire of Jindongnan-Nanyang-Jingmen 1000kV UHV AC transmission line

Failure Mechanism Analysis of High Resistance Grounding Fault Protection in Distribution Network

Analysis of Safety Protection Measures for Maintenance Work of 500 kV Double-Circuit Transmission Lines on Same Tower