Abstract:Considering the influences of such factors as soil mechanical characteristics, pile material properties, pile length and pile diameter (including the expanded pedestal diameter), depth of the pile top, and unloading and loading around the pile top and pile group effect, combined with engineering practices, an empirical-theoretical calculation method for the ultimate bearing capacity of an expanded pedestal uplift pile is proposed in this paper. Based on different positions of the failure surface of the expanded pedestal uplift pile, the failure mode of the expanded pedestal uplift pile is divided into three types: entire shearing failure from the failure surface extending to the ground surface, local shearing failure of the failure surface between the ground surface and borehole-expanded section, and punching shear failure of the failure surface near the borehole-expanded section. An ultimate equilibrium state equation under the entire shearing failure mode is derived. According to the axial symmetry conditions of the expanded pedestal uplift pile and the mechanical characteristics of the lower soil tensile strength, a differential cylinder numerical solution is given regarding the entire failure surface. By using the empirical method to estimate the end resistances under the local shearing failure mode or punching shear failure mode, the calculating procedure and method for the ultimate bearing capacity of the expanded pedestal uplift pile in any soil layer is put forward. Finally, the reliability and accuracy of the calculating method is verified through a comparison between the calculated ultimate bearing capacity and the measured one in a full-scale test.

A NEW CALCULATION METHOD FOR LARGE-DIAMETER-TUBULAR-PILE BEARING CAPACITY

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

3-D Numerical Simulation for Large-Diameter Cast-<i>In Situ</i> Tubular Pile

3-D Numerical Simulation for Large-Diameter Cast-In-Situ Tubular Pile

Analysis of Axial Load-Transfer of Large-Diameter Cast-in-situ Tubular Pile

A Method for Calculation of the Bearing Capacity of Cast-In-Situ Piles with Expanded Branches and Plates

RESEARCH ON INFLUENCE OF SOIL CORE ON BEARING CHARACTER OF LARGE-DIAMETER TUBULAR PILE USING CAST-IN-SITU CONCRETE

NONLINEAR CALCULATING METHOD BASED ON CPTU DATA TO ESTIMATE BEARING CAPACITY OF RIGID PILE

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

Study on Axial Bearing Properties of Cast-in-place Concrete Thin-Wall Tubular Piles

A new equivalent transformation method for calculating the pile bearing capacity on self-balancing test results

Calculation Method for the Bearing Capacity of Pile by Considering the Nonlinear Character of Side Resistance

Method for Calculating Vertical Compression Bearing Capacity of the Static Drill Rooted Nodular Pile

A Calculation Method of Bearing Capacity of Single Squeezed Branch Pile Based on Load Transfer Method

Calculation methods for ultimate end bearing capacity of large diameter rock-socketed piles

A Simplified Calculation Method for Ultimate Bearing Capacity of Cast-in-Place Concrete Pipe Pile with Large Diameter in Clay Soil

A simplified method for calculating ultimate bearing capacity of cast-in-place concrete pipe pile with large diameter in sandy soil

Calculation of axially bearing capacity of a batter pile based on mechanism of deformation compatibility

Axial Compression Bearing Capacity of Frictional Single Pile

New Method Based on CPTU Data to Evaluate Pile Bearing Capacity

An Empirical-Theoretical Calculation Method and Full-Scale Verification Test for the Ultimate Bearing Capacity of an Expanded Pedestal Uplift Pile