Abstract:The static drill rooted nodular pile is a new type of pile foundation consisting of precast nodular pile and the surrounding cemented soil.This composite pile has a relatively high bearing capacity and the mud pollution will be largely reduced during the construction process by using this type of pile.In order to investigate the bearing capacity and load transfer mechanism of this pile,a group of experiments were conducted to provide a comparison between this new pile and the bored pile.The axial force of a precast nodular pile was also measured by the strain gauges installed on the pile to analyze the distribution of the axial force of the nodular pile and the skin friction supported by the surrounding soil,then 3D models were built by using the ABAQUS finite element program to investigate the load transfer mechanism of this composite pile in detail.By combining the results of field tests and the finite element method,the outcome showed that the bearing capacity of a static drill rooted nodular pile is higher than the bored pile,and that this composite pile will form a double stress dispersion system which will not only confirm the strength of the pile,but also make the skin friction to be fully mobilized.The settlement of this composite pile is mainly controlled by the precast nodular pile;meanwhile,the nodular pile and the surrounding cemented soil can be considered as deformation compatibility during the loading process.The nodes on the nodular pile play an important role during the load transfer process,the shear strength of the interface between the cemented soil and the soil of the static drill rooted pile is larger than that of the bored pile.

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Performance analysis of cast-in-place tubular pile composite ground under embankment load

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Analysis of cast-in-situ tubular piles in soft foundation improvement at bridge approaches

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Analysis of Axial Load-Transfer of Large-Diameter Cast-in-situ Tubular Pile

Study on Axial Bearing Properties of Cast-in-place Concrete Thin-Wall Tubular Piles

RESEARCH ON INFLUENCE OF SOIL CORE ON BEARING CHARACTER OF LARGE-DIAMETER TUBULAR PILE USING CAST-IN-SITU CONCRETE

A test on base bearing capacity of static drill rooted nodular pile

Analysis of Bearing Performance of Composite Foundation with Cast-in-situ Concrete Thin-Wall Pipe Piles under Vertical Loads

The engineering characteristic of precast tubular pile and mixing cement pile composite foundation for deep soft ground

Bearing Capacity And Load Transfer Mechanism Of Static Drill Rooted Nodular Piles

In Situ Tests on Cast-in-Place Concrete X-Section Pile for Bearing Capacity of Single-Pile Composite Foundation

Bearing capacitytests and settlement calculation method of plastic tube cast-in-place concrete pile

Field Study of Bearing Behavior of Pile-Net Composite Foundation

Analysis of Ultimate Bearing Capacity of X-section Cast-in-place Concrete Pile Composite Foundation under Rigid Load

Construction and Analysis of Cast-in-Place Tubular Piles

Experimental Study and Numerical Analysis of the Composite Pile

Bearing Capacity and Load Transfer Mechanism of a Static Drill Rooted Nodular Pile in Soft Soil Areas

Analysis of effected factors for vertical compressive bearing capacity of ribbed bamboo joint pile