Abstract:The rigid pile composite foundation is widely used in highway projects in soft soil area as it can effectively increase the bearing capacity and stability of the foundation. While the research on the behavior and failure mode of rigid pile composite foundation under embankment is not enough, instability failure of rigid pile composite foundation often occurs in practical projects. This paper presents a centrifuge model test to investigate the load transfer mechanism, settlement characteristic and failure mode of rigid pile composite foundation under embankment. The test results show that: the soil displacement of different region in rigid pile composite foundation was different, obvious vertical displacement occurred in the soil under the center of embankment and the horizontal displacement was very small in this region; both vertical and horizontal displacement occurred in the soil under the shoulder of embankment; and obvious horizontal displacement occurred in the soil under the slope toe of embankment; moreover, ground heave also occurred near the slope toe of embankment. The soil displacement in rigid pile composite foundation had a large influence on the stress characteristic and failure mode of rigid piles, the compressive failure and bending failure would probably occur for the piles under the center and shoulder of the embankment, respectively, and the tension-bending failure would probably occur for the piles under the slope toe of embankment. The different failure modes of piles at different regions should be considered in the design of rigid pile composite foundation under embankment. The test results can be used to improve the design method for rigid pile composite foundation under embankment in practical projects.

Study On Characteristics Comparison Between Rigid Pile In Composite Foundation With Rigid-Flexible Piles And That In Free State

Experimental Study on Behavior of Composite Foundation with Rigid-Flexible Piles

Test Research on the Behavior of Composite Foundations Incorporating Rigid and Flexible Piles

In-situ test of bearing capacity behavior of composite foundation with rigid-flexible piles

Influences of different replacement ratios on composite foundation with rigid-flexible piles

Study on Rigid-flexible Piles Composite Foundation with Worse Quality

Characteristic study on composite foundation with rigid-flexible piles under the load from embankment

Finite Element Analysis of Deformation Characteristics of Composite Foundation with Rigid-Flexible Piles

Research on In-Situ Tests of Pile Load Transfer Behaviors in Composite Foundation with Rigid-Flexible Piles

Engineering Characteristics Of Composite Foundation With Rigid-Flexible And Long-Short Piles

Experimental Study Of The Rigid-Flexible Pile Composite Foundation

Static Load Test and Load Transfer Mechanism Study of Squeezed Branch and Plate Pile in Collapsible Loess Foundation

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Test Study on Composite Road Foundation of Soft Soil Consolidated with Mortar Sprayed Piles

The engineering characteristic of precast tubular pile and mixing cement pile composite foundation for deep soft ground

Field Study of Bearing Behavior of Pile-Net Composite Foundation

Working Behavior of Composite Ground Improved by Rigid Piles Under Flexible Foundation

Performance of Rigid-Flexible-Pile Foundation with Cushion

Numerical analysis on the performance of a cushioned foundation with a mixture of both rigid and flexible piles

Field Test Study on the Improvement Mechanism of Pile-Net Composite Foundation

Centrifuge Study on Behavior of Rigid Pile Composite Foundation under Embankment in Soft Soil