Abstract:The static drill rooted nodular pile is a new type of pile foundation consisting of precast nodular pile and the surrounding cemented soil.This composite pile has a relatively high bearing capacity and the mud pollution will be largely reduced during the construction process by using this type of pile.In order to investigate the bearing capacity and load transfer mechanism of this pile,a group of experiments were conducted to provide a comparison between this new pile and the bored pile.The axial force of a precast nodular pile was also measured by the strain gauges installed on the pile to analyze the distribution of the axial force of the nodular pile and the skin friction supported by the surrounding soil,then 3D models were built by using the ABAQUS finite element program to investigate the load transfer mechanism of this composite pile in detail.By combining the results of field tests and the finite element method,the outcome showed that the bearing capacity of a static drill rooted nodular pile is higher than the bored pile,and that this composite pile will form a double stress dispersion system which will not only confirm the strength of the pile,but also make the skin friction to be fully mobilized.The settlement of this composite pile is mainly controlled by the precast nodular pile;meanwhile,the nodular pile and the surrounding cemented soil can be considered as deformation compatibility during the loading process.The nodes on the nodular pile play an important role during the load transfer process,the shear strength of the interface between the cemented soil and the soil of the static drill rooted pile is larger than that of the bored pile.

RESEARCH ON INFLUENCE OF SOIL CORE ON BEARING CHARACTER OF LARGE-DIAMETER TUBULAR PILE USING CAST-IN-SITU CONCRETE

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

A NEW CALCULATION METHOD FOR LARGE-DIAMETER-TUBULAR-PILE BEARING CAPACITY

Study on Axial Bearing Properties of Cast-in-place Concrete Thin-Wall Tubular Piles

Analysis of Axial Load-Transfer of Large-Diameter Cast-in-situ Tubular Pile

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Study on Bearing Behavior of Pure-friction Long Pile in Soft Clay

3-D Numerical Simulation for Large-Diameter Cast-<i>In Situ</i> Tubular Pile

Experimental Study on Behavior of Composite Foundation with Rigid-Flexible Piles

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Model Test Study of Bearing Behavior of Small Prefabricated Piles in Soft Soil Area

3-D Numerical Simulation for Large-Diameter Cast-In-Situ Tubular Pile

Field Test on the Influence of the Cemented Soil Around the Pile on the Lateral Bearing Capacity of Pile Foundation

Performance analysis of cast-in-place tubular pile composite ground under embankment load

A test on base bearing capacity of static drill rooted nodular pile

Influence of Soil Reinforcement on the Uplift Bearing Capacity of a Pre-Stressed High-Strength Concrete Pile Embedded in Clayey Soil

Laboratory tests on the frictional capacity of core pile - cemented soil interface

Bearing Capacity and Load Transfer Mechanism of a Static Drill Rooted Nodular Pile in Soft Soil Areas

Bearing Capacity And Load Transfer Mechanism Of Static Drill Rooted Nodular Piles

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile