Abstract:Jacket foundations for offshore wind turbines, typically having three or four latticework legs, are mainly subjected to lateral loads induced by winds, waves and currents during their service life. An accurate assessment of the bearing capacity of these foundations is of great importance in the design. This paper presents a study into the monotonic lateral loading behavior of tetrapod piled jacket foundations in undrained clay, with the complex lateral loads being simplified to an equivalent lateral load acting at a certain height of the jacket. A centrifuge testing programme was undertaken to provide high-quality validation data for the development of a three-dimensional finite element model established using ABAQUS. The key parameters investigated are the spacing and embedment of the piles, the height to which the equivalent lateral load acts and the angle between the direction of this load and the orthogonal line of the jacket in the horizontal plane. The parametric study aims to provide guidance to the optimal design of jacket piled foundations: for instance, to examine the critical pile embedment beyond which limited improvement of the bearing capacity of the foundation can be achieved and to define the most unfavorable lateral loading direction. In addition, the limitations of the commonly assumed constant p-multiplier, regardless of the lateral deflection of the pile and the depth along it, are critically discussed. Then an improved analytical model is proposed, based on the existing model used in design and the parametric study results, to quantify the variation of p-multiplier with depth and with pile deflection.

Design Method Reliability Assessment from an Extended Database of Axial Load Tests on Piles Driven in Sand

Database Assessment of Design Methods for Axial Bearing Capacity of Driven Piles in Sand

A New and Openly Accessible Database of Tests on Piles Driven in Sands

Assessment of design methods for axial bearing capacity of driven piles in clay

Joint Research into the Behaviour of Driven Piles

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

Large Deformation Finite-Element Simulation of Displacement-Pile Installation Experiments in Sand

Field Trials on Monotonic Behaviour of a Driven Pile at an Offshore Wind Farm in China

Effect of Loading Rate on Lateral Pile-Soil Interaction in Sand Considering Partially Drained Condition

Field and Model Investigations into the Influence of Age on Axial Capacity of Displacement Piles in Silica Sands

Soil-pile interaction on an instrumented pile under cyclic axial loads in sand

A NEW CALCULATION METHOD FOR LARGE-DIAMETER-TUBULAR-PILE BEARING CAPACITY

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Ultimate Soil Resistance of the Laterally Loaded Pile in Uniform Sand

Analysis of the End-Bearing Capacity of Piles in Sand under Limited Region Failure by a Mixed Zero-Extension Line Method

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

Experimental Study on the Development of Surrounding Soil Stress During XCC Pile Installation in Sand

Influence of the Penetration of Adjacent X-section Cast-in-place Concrete (XCC) Pile on the Existing XCC Pile in Sand

Quantifying the Influence of Pile Diameter on the Load Transfer Curves of Laterally Loaded Monopile in Sand

Updating reliability of pile groups with load tests considering spatially variable soils