Quantifying the Influence of Pile Diameter on the Load Transfer Curves of Laterally Loaded Monopile in Sand

H. Wang,L. Z. Wang,Yi Hong,B. He,R. H. Zhu

DOI: https://doi.org/10.1016/j.apor.2020.102196

IF: 3.761

2020-01-01

Applied Ocean Research

Abstract:Although the load transfer curves (i.e., p-y curves) recommended by the current industry standards are regarded as questionable for the recently emerging large diameter monopile, the influence of pile diameter and bending stiffness on the p-y curves in sand has not been systematically quantified. Nor have the underlying mechanisms of the diameter dependent p-y curves been well understood. This study presents a series of well calibrated threedimensional finite-element (FE) analyses, aiming to quantify p-y curves of laterally loaded piles with different pile diameters and bending stiffness in sand, and to reveal the underlying mechanisms. It is found that the p-y curves in the API [6] code, which are valid for piles with a small diameter (D = 1 m), overestimate the initial stiffness while underestimates the soil resistance of a large-diameter pile (D = 5 m) by more than 90%. The numerical analyses further reveal that the modification of the p-y curves with the increasing pile diameter is mainly associated with the altered soil deformation mechanisms around the increasingly stiff pile. On the other hand, the influences of the skin friction, base shear and base moment of the large-diameter pile (with D up to 5 m) on the p-y curves are almost negligible. New p-y curves considering the effect of failure mechanism of large diameter monopile in dense sand is proposed, which are shown to yield better predictions for large-diameter piles than the existing p-y curves.