Abstract:New brazed diamond specimens were prepared by adding different types of rare earth (RE) alloys to Cu-Sn-Ti filler metal. The microstructure and mechanical properties of the filler metal were characterized, and the interfacial characteristics and grinding properties of the brazed diamond specimens were analyzed. The addition of rare earth alloy (10% Cu-La alloy, 10% Cu-Ce alloy, and 10% Cu-Nd alloy) can improve the microstructure of the filler metal, reduce the number and size of holes and cracks in the filler metal, and improve the mechanical properties of the filler metal. The results of the grinding tests showed that the addition of the three rare earth alloys could improve the holding strength of the filler metal on the diamond grains, reduce the shedding rate of the diamond grains, and improve the grinding performance of the brazed diamond specimens. Compared with the other two rare earth alloys, the addition of 10% Cu-Nd improves the mechanical properties of the filler metal most significantly, and the best grinding performance of brazed diamond samples is obtained because there is no composite undercooling and aggregation of rare earth elements. The mechanism of rare earth alloy to improve the holding strength of filler metal to diamond abrasive grains was elucidated that the rare earth elements consume Cu and Sn elements in the filler metal, and the enrichment of Ti elements at the interface increases the thickness of the TiC interfacial layer. In addition, the reduction of cracks and holes in the filler metal decreased the defects around the diamond of the brazed specimen, effectively avoiding the rapid expansion of cracks along with these defects during the grinding process.

Effect of Rare Earth on Abrasion Resistance of Multi-aluminum Bronze

Effects of Rare Earth Additions on Compound Structure and As-Annealed Properties of Cu-12%Ag

Effects of Rare Earths on the Microstructure, Properties and Fracture Behavior of Mg–Al Alloys

Effects of Rare Earth Elements on Microstructure and Corrosion Resistance of Low Alloy Steel Based on Ultra-Thin Cast Strip Process

Microstructure and Mechanical Property of Deposited Metal of Low-alloy Wear-resistance Steel Electrode with RE

Effects of RE on Microstructures of Mg-8Zn-4Al-0.3Mn Magnesium Alloys

Effect of RE on the structure and properties of B319 aluminium alloy

Study on sliding friction and wear behavior of M50 bearing steel with rare earth addition

Effect of Rare Earth Elements on the Erosion Resistance of Nitrided 40cr Steel

Effects of Rare Earth Er on the As-cast Microstructure of 7055 Aluminum Alloy

Effects of Rare Earth on Composite Ni-Fe-P-RE Alloy Coating

Effect of rare earth on microstructure and properties of the self-propagating spraying coating

Effects of Ce-rich RE on Microstructure and Mechanical Properties of As-Cast Mg-8Li-3Al-2Zn-0.5Nd Alloy with Duplex Structure

Influence of rare earth addition on microstructures and mechanical properties of high-pressure die casting Mg–8Zn–6Al alloy

Effect of Feeding Ca–Mg–RE–Zr Composite Cored Wire During Refining of Liquid Steel on Abrasive Wear Resistance of High-Strength Steels

Microstructure and properties of typical equiatomic CrMnFeCoNi high entropy alloy doped with different rare earth elements

Effects of Re on Microstructure and Properties of Az91 Magnesium Alloy

Effect of Rare Earth Metals on Microstructure and Corrosion Resistance of Zn–0·18Al Coatings

A review on wear resistance of Mg alloys: the influence of common rare earth alloying elements and general modification techniques

Effects of RE on the Microstructure and Mechanical Properties of Mg–8Zn–4Al Magnesium Alloy

Effect of rare earth alloy addition on the microstructure and abrasion resistance of brazed diamonds with Cu-Sn-Ti filler metal