Abstract:Rare earth (RE) Ce can significantly improve the mechanical properties of 7CrSiMnMoV die steel castings. It mainly contributes that RE Ce can significantly inhibit the precipitation of cementite carbides structure. Ab initio molecular dynamics simulation results show that C atoms tend to be surrounded by Fe, and RE make the Fe‐centered C more stable. In this study, rare earth (RE) Ce is used to modify the interaction between atoms in 7CrSiMnMoV die steel castings. The tensile properties are performed, and strengthening mechanism are analyzed by investigated fracture surface, and microstructure by optical microscopy (OM) and scanning electron microscope‐energy dispersive spectrometer (SEM‐EDS). And ab initio molecular dynamics (AIMD) is used to simulate the effect of the Ce element on the local atomic structure of the FeCeC system alloy steel. The results indicate the strength can increase from 722.55 to 1074.27 MPa, and the elongation can increase from 24.86% to 44.22% with a RE Ce concentration of 0.009%. It is attributed to that doping of Ce can inhibit the formation of network eutectic cementite, refine the lamellar spacing of pearlite, and even form granular cementite and martensite structures. AIMD simulation results show that C atoms tend to be surrounded by Fe, and the strong chemical bonds of FeC make the Fe‐centered C more stable with an increase in RE Ce concentration. And doping Ce can introduce new local topological and chemical orderings such that the FeCFe triplets predominantly form small and big angles shifting from near 75° and 136° to 47° and 81°, respectively.

Effects of Rare Earth on the Heat Resistance of Ni-Mo Cast iron in Permanent Mould

Effects of Rare Earth Alloys on Structures and Properties of Grey Cast Iron

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Examining the role of rare earth elements on grey iron's microstructural and mechanical properties

Effects of Rare Earth Additions on Compound Structure and As-Annealed Properties of Cu-12%Ag

Effects of Rare Earth on Composite Ni-Fe-P-RE Alloy Coating

The Effects of RE-Mg on Thermal Fatigue Resistance of Cast High Speed Steel (HSS) Rolls

Effect of rare earth composition on the electrochemical properties of multicomponent RENi5-xMx (M = Co, Mn, Ti) alloys

The effect of niobium addition on the microstructure and properties of cast iron used in cylinder head

Effects of rare earth elements on annealing characteristics of Cu–6wt.% Fe composites

Effects of rare-earth elements on the oxidation behavior of γ-Ni in Ni-based single crystal superalloys: A first-principles study from a perspective of surface adsorption

The Effect of Rare Earth Metals Alloying on the Internal Quality of Industrially Produced Heavy Steel Forgings

Rare Earth Elements Enhanced the Oxidation Resistance of Mo-Si-Based Alloys for High Temperature Application: A Review

Effect of rare earth oxide on the crystallization behavior of CaO-Al2O3-based mold flux for rare earth heat-resistant steel continuous casting

Effects of Niobium on the Strength and Toughness of Low-Chromium High-Boron Cast Iron

The preparation and properties of iron base self-fluxing alloy spray-welding coatings with different rare earths and chromium content

Effects of rare earth element on the fracture toughness and ductility of 18Ni (350) maraging steel

Influence of rare earth addition on microstructures and mechanical properties of high-pressure die casting Mg–8Zn–6Al alloy

Effect of Rare Earth Ce on Structure and Properties in 7CrSiMnMoV Die Steel Castings

Microstructure and properties of typical equiatomic CrMnFeCoNi high entropy alloy doped with different rare earth elements

Effect of rare earth elements on microstructure and mechanical properties of bainite/martensite bearing steel