Alkalization Experiment and Coagulation Performance of Poly-Silicic-ferric Coagulant

FU Ying,GAO Bao-yu
2010-01-01
Abstract:Poly-silicic-ferric (PSF) coagulant with various Si/Fe ratios(PSF 0.5 and PSF 3 represent Si/Fe molar ratios of 0.5 and 3, respectively), was prepared by co-polymerization. The alkalization experiments of PSF and coagulation performance of PSF in treating surface water collected from the Songhua River and sewage water from Nangang district in Harbin were investigat-ed. The results showed that some information-assisted the reaction mechanism between Si and Fe and the species transformation could be captured by the alkalization experiment. The alkalization experiment further improved validation of the Si-Fe reaction mechanism: much larger morphology based on Si-O-Fe-O-Fe-O-Si bond was immediately formed and then the unstable Fe-O-Fe bond breaks with increasing of the co-polymerization time in lower ratios of PSF (such as PSF 0.5) at initial co-polymerization stage. While for higher ratios of PSF (such as PSF 3), only a small amount of Fe~(3+) participates in complexation with PS at the initial co-pelymerization stage, and species based on the Si-O-Fe-O-Si-O-Si bond was formed. The optimum doses of PSF 0.5 and PSF 3 are 8.5 mg/L and 10.5 mg/L for surfaces water and are 70 mg/L and 100 mg/L for sewage water according to the removal of turbidity, UV_(254) and COD, respectively. PSF 3 gave a lower re-stabilization dose for turbidity removal than PSF 0.5, while the contrary was true for UV_(254) and COD removal.
What problem does this paper attempt to address?