Abstract:A new inorganic polymer coagulant, poly-silic-ferric sulfate (PSF) with various Si/Fe ratios (PSF0.5, PSF1 and PSF denote Si/Fe molar ratios of 0.5, 1 and 3, respectively), was prepared using water glass, ferrous sulfate and sodium chlorate by co-polymerization, and pH value was measured during the preparation process. The influence of both Si/Fe ratio and reaction time (polymerization time) on the complexation process (bonding mode) between Si and Fe was explored with many analytical methods (such as X-ray diffraction (XRD), ultraviolet/visible absorption (UVA) scanning, transmission electron microscope (TEM), photon correlation spectra (PCS) and infrared spectrum (IR) using PSF samples taken from different reaction time at different Si/Fe ratios. The results show that the characteristics of PSF are largely influenced by both reaction time and Si/Fe ratios. PSF is found to be a complexation compound of Si, Fe and many other ions, instead of a simple mixture of raw materials. The complexation process between Si and Fe may be different from various Si/Fe ratios, namely, the bonding rate, bonding mode and the stability of the bond between Si and Fe are different from various Si/Fe ratios: the polymer based on Si-O-Fe-O-Fe-O-Si bond may be formed at low Si/Fe ratio, in comparison with that based on Si-O-Fe-O-Si-O-Si bond at high Si/Fe ratio; the formation rate of Fe-O-Fe bond is rapid and there may be a mutual acceleration between Fe-O-Fe bond and Si-O-Fe bond, while the formation rate of Si-O-Si is slow and maybe there is a mutual retardation between Si-O-Fe bond and Si-O-Si bond; the stability of Fe-O-Fe bond is weaker than that of Si-O-Fe or Si-O-Si bond.

[Analysis of reaction process between Si and Fe in poly-silicic-ferric sulfate (PSF) coagulant]

Effect of Acidulant on Coagulation Performance of Polysilicate Ferrite

Enhanced Coagulation-Flocculation Performance of Iron-Based Coagulants: Effects of PO4(3-) and SiO3(2-) Modifiers

Properties of polyferric-silicate-sulfate(PFSS) coagulant

Coagulation Efficiency of Polysilicate-Ferric and Its Application to Metal-Processing Wastewater

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Interaction Of Polyelectrolyte With Fluorocarbon Surfactant In Aqueous Solution

Research on Phosphorus Removal by Polysilicate Ferric(psf)

Poly Ferric Silicate Sulphate (PFSiS): Characterization, Coagulation Behavior and Applications in Oily Wastewater Treatment

Study on Preparation and Flocculation Properties of Inorganic Polymer Flocculant Polyferric Silicate Sulfate (Pfss)

The Production and Application of Complex Flocculant Polysilicate Aluminium Ferric(PSAF)

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Facile synthesis of composite polyferric magnesium–silicate–sulfate coagulant with enhanced performance in water and wastewater

Polymerization mechanism of polyferric aluminum phosphatic sulfate (PFAPS) and its flocculation effect on simulated dye wastewater

Synthesis and Application of PAFSi

Preparation of Polystyrene/Sio2 Composite Nanoparticles Bearing Sulfonic Groups on the Surface Via Emulsion Copolymerization Using A Polymerizable Emulsifier

Synthesis, Characterization, and Coagulation of Polymeric Ferric Sulfate

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Styrene mini-emulsion polymerization co-stabilized by predissolved fluoropolymer

Preparation of Polymerized Silicate Composite Flocculant

Research on Flocculation Behaviors of Poly Ferric Silicate Sulphate and Its Application in Heavy Oil Wastewater Treatment