Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Study on packaging technique of fiber Bragg grating

A Method of the Synthesis of Fiber Bragg Grating Array without Any Damage

Secure Optical Communication System Based on Tunable Fiber Bragg Grating Arrays

V-Groove-Based Compact Fbg Package for Thermal Tuning and Mechanical Stability

Fiber Bragg Grating Online Packaging Technology Based on 3D Printing

Temperature Stability of High Ge-doped Fibre Bragg Grating

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Technology and test of fiber Bragg grating in composite materials

Studies on High-Sensitivity Hydrostatic Pressure Sensor Using Fiber Bragg Grating

Fabrication of high quality chirped fiber Bragg grating by establishing strain gradient

Study on the Strain and Temperature Densing Characterist ics of FBG Packaged by the Copper slice

Study on Experiment of Fiber Bragg Grating Pressure Sensitivity

Experimental Study of Fiber Bragg Grating for different Period by using Phase Mask Technique.

Slit Beam Shaping for Femtosecond Laser Point-by- Point Inscription of High-Quality Fiber Bragg Gratings

Fiber-end antireflection method for ultra-weak fiber Bragg grating sensing systems

A Novel High-Sensitivity Chirp Tuning Device of Fiber Grating

Reliable packaging of optical fiber Bragg grating sensors for carbon fiber composite wind turbine blades

Study of Sensing Properties and Contrastive Analysis of Metal Coating Optical Fiber Grating

Tunable Superstructure Fiber Bragg Grating with Chirp-Distribution Modulation Based on the Effect of External Stress

Fiber Bragg gratings fabricated in fibers with different geometries by femtosecond laser written through the coating and their applications in strain sensing and fiber laser

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss