Abstract:This work aims at the determination of the coefficient of thermal expansion (CTE) of parts manufactured through the Fused Deposition Modeling process, employing fiber Bragg grating (FBG) sensors. Pure thermoplastic and composite specimens were built using different commercially available filament materials, including acrylonitrile butadiene styrene, polylactic acid, polyamide, polyether-block-amide (PEBA) and chopped carbon fiber-reinforced polyamide (CF-PA) composite. During the building process, the FBGs were embedded into the middle-plane of the test specimens, featuring 0° and 90° raster printing orientations. The samples were then subjected to thermal loading for measuring the thermally induced strains as a function of applied temperature and, consequently, the test samples' CTE and glass transition temperature (Tg) based on the recorded FBG wavelengths. Additionally, the integrated FBGs were used for the characterization of the residual strain magnitudes both at the end of the 3D printing process and at the end of each of the two consecutively applied thermal cycles. The results indicate that, among all tested materials, the CF-PA/0° specimens exhibited the lowest CTE value of 14 × 10-6/°C. The PEBA material was proven to have the most isotropic thermal response for both examined raster orientations, 0° and 90°, with CTE values of 117 × 10-6/°C and 108 × 10-6/°C, respectively, while similar residual strains were also calculated in both printing orientations. It is presented that the followed FBG-based methodology is proven to be an excellent alternative experimental technique for the CTE characterization of materials used in 3D printing.

Fiber Bragg Grating Online Packaging Technology Based on 3D Printing

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

A novel packaging method for FBG temperature sensors based on ultrasonic-assisted soldering technology

Application of Additive Layer Manufacturing Technique on the Development of High Sensitive Fiber Bragg Grating Temperature Sensors

Study on the Strain and Temperature Densing Characterist ics of FBG Packaged by the Copper slice

Fiber Bragg Gratings Embedded in 3D-Printed Scaffolds

A Cheap and Practical FBG Temperature Sensor Utilizing a Long-Period Grating in a Photonic Crystal Fiber

The Improvement of Temperature Sensitivity by Eliminating the Thermal Stress at the Interface of Fiber Bragg Gratings

Strain Sensor Based on Embedded Fiber Bragg Grating in Thermoplastic Polyurethane Using the 3D Printing Technology for Improved Sensitivity

V-Groove-Based Compact Fbg Package for Thermal Tuning and Mechanical Stability

A FBG Tilt Sensor Fabricated Using 3D Printing Technique for Monitoring Ground Movement

Quasi-Distributed Temperature Sensing Using Apodized Fiber Bragg Grating Array

Strain and Temperature Sensing Based on Different Temperature Coefficients fs-FBG Arrays for Intelligent Buoyancy Materials

Reliable packaging of optical fiber Bragg grating sensors for carbon fiber composite wind turbine blades

Study on Experiment of Fiber Bragg Grating Pressure Sensitivity

Temperature Sensing of Metal-Coated Fiber Bragg Grating

3D Shape Sensing With FBG-Based Patch: From the Idea to the Device

Performance Comparison of a 3D Printed Fiber Bragg Grating (FBG) Load Cell Sensor based on the Influence of Different Infill Density and Pattern

High-order fiber Bragg grating fabricated by femtosecond laser pulses for high-sensitivity temperature and strain sensing

Temperature Compensation of Fiber Bragg Grating Sensors in Smart Strand

Characterization of Thermal Expansion Coefficient of 3D Printing Polymeric Materials Using Fiber Bragg Grating Sensors