Abstract:Fiber Bragg grating optical sensors are nowadays widely employed for strain measurement for structural health monitoring and in experimental mechanics. Compared to other techniques, i.e. electrical strain gauges, fiber Bragg grating offer immunity to electromagnetic interference and allow for long transmission lead lines. Moreover, thanks to multiplexing interrogation, several sensors can be photo-imprinted into a single fiber core allowing for strain evaluation at multiple locations simultaneously. They have high adaptability to composite materials, particularly because it is possible to be embedded into laminates without affecting their strength and stiffness. Fiber Bragg grating strain measurements are based on the detection of the wavelength shift of their peak reflected spectrum. However, subjected to strain gradients, the spectral response of fiber Bragg grating sensors may be distorted and the sharp peak may not be retained. In this work, the response of fiber Bragg grating sensors having different grating lengths and bonded to the surface of a carbon fiber-reinforced twill woven laminate was analyzed. The analysis combined transfer matrix (T-matrix) with digital image correlation methods. Digital image correlation technique was used to capture the non-uniform strain fields in the woven composites and measured strains were employed in T-Matrix algorithm to simulate fiber Bragg grating response. Using this approach, the effect of the length of the fiber Bragg grating on the strain measurement is assessed and results discussed. Moreover, it is shown that T-matrix formulation combined with a non-contact strain field measurement technique, as DIC, is an appropriate technique to simulate the behavior of fiber Bragg grating bonded to composite materials of complex microstructure.

Fiber Bragg Gratings Embedded in 3D-Printed Scaffolds

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

Experimental studies of sensors based on fiber Bragg gratings embedded in the internal structure of composite plates

Fiber Bragg Grating Sensors toward Structural Health Monitoring in Composite Materials: Challenges and Solutions

Evaluation of Carbon Fiber-Embedded 3D Printed Structures for Strengthening and Structural-Health Monitoring

A Novel Method of Embedding Distributed Optical Fiber Sensors for Structural Health Monitoring

Application of Additive Layer Manufacturing Technique on the Development of High Sensitive Fiber Bragg Grating Temperature Sensors

Assessment of embedded fiber Bragg gratings for structural health monitoring of composites

Structural Health Monitoring of a Tall Building during Construction with Fiber Bragg Grating Sensors

Strain Sensor Based on Embedded Fiber Bragg Grating in Thermoplastic Polyurethane Using the 3D Printing Technology for Improved Sensitivity

Strain Measurement and Defect Detection with Fiber-Optic Sensors Embedded into the Cement Sample

Machine learning-augmented multi-arrayed fiber bragg grating sensors for enhanced structural health monitoring by discriminating strain and temperature variations

Global and Local Fiber Optic Sensors for Health Monitoring of Civil Engineering Infrastructure Retrofit with FRP Materials

Experimental analysis of the response of fiber Bragg grating sensors under non-uniform strain field in a twill woven composite

Three-Dimensional-Printed Mechanical Transmission Element with a Fiber Bragg Grating Sensor Embedded in a Replaceable Measuring Head

Structural Health Monitoring of Composite Laminate for Aerospace Applications via Embedded Panda Fiber Bragg Grating

Composite Bridge Girders Structure Health Monitoring Based on the Distributed Fiber Sensing Textile

3D Shape Sensing With FBG-Based Patch: From the Idea to the Device

Additive manufacturing method application for manufacturing polymeric structure with embedded fiber Bragg grating sensor

Embedded fibre Bragg grating sensors for non-uniform strain sensing in composite structures