A novel packaging method for FBG temperature sensors based on ultrasonic-assisted soldering technology

Xueli Yang,Mingyao Liu,Han Song,Jun Rao,Yihang Wu
DOI: https://doi.org/10.1016/j.sna.2024.115381
IF: 4.291
2024-04-27
Sensors and Actuators A Physical
Abstract:The packaging technology of fiber Bragg grating (FBG) sensors is the key to determining their operational performance. A method for encapsulating FBG temperature sensors using ultrasonic-assisted soldering technology has been proposed and attempted. This packaging method is based on the successful connection between SiO 2 quartz glass and Invar alloy. Implementing this soldering connection depends on the active components in the solder, which are dispersed into SiO 2 and metal alloys to form more stable substances. The FBG with the removed coating is reliably connected to the metal capillary through ultrasonic soldering. The fragile FBG is adequately protected in the capillary. Sn-based solder with a melting point of 297 °C has been selected. The soldering temperature of 330 °C avoids significant residual stress caused by the difference in the thermal expansion coefficient of the material at the joint. Excellent bonding strength between optical fibers, solder, and capillaries is necessary for encapsulating sensors. Compared to adhesive, solder packaging is no longer affected by the creep of the sealant. The results show that the working range of FBG temperature sensors encapsulated in epoxy resin is −25 °C −115 °C, while temperature sensors encapsulated by welding can operate stably at −50 °C −280 °C. Sensors packaged using ultrasonic-assisted soldering technology have the potential to be embedded in metal substrates, creating favorable conditions for the development of intelligent electromechanical components.
engineering, electrical & electronic,instruments & instrumentation
What problem does this paper attempt to address?