Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Tunable Superstructure Fiber Bragg Grating with Chirp-Distribution Modulation Based on the Effect of External Stress

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

A Novel High-Sensitivity Chirp Tuning Device of Fiber Grating

Sensitivity-Tunable FBG Interrogation System Utilizing a Mechanically Induced Long Period Fiber Grating

Structures for Enhancing Fiber Bragg Grating Pressure Sensitivity

Fabrication of high quality chirped fiber Bragg grating by establishing strain gradient

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Fiber Bragg gratings fabricated in fibers with different geometries by femtosecond laser written through the coating and their applications in strain sensing and fiber laser

Silt-Beam Shaping Method for Femtosecond Laser Point-by-Point Inscription of Highly Localized Fiber Bragg Gratings with Enhanced Cladding Modes

Femtosecond Laser Inscribed Chirped Fiber Bragg Gratings.

Microcavity-coupled fiber Bragg grating with tunable reflection spectra and speed of light

Fiber Bragg Grating with Enhanced Cladding Modes Inscribed by Femtosecond Laser and a Phase Mask

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Use of the Stokes Parameters of Fbg for Transverse Strain Sensing and the Optimization of the Grating Structure

Development of a Device with Controllably Tuning Bandwidth of Fiber Bragg Grating

Experimental Investigations of a Stress-Gradient Sampled Bragg Grating with a Chirp in the Sampling Period

Research on the reflection spectrum of linear chirped fiber bragg grating under the impact of dynamic stress]

Compact high-resolution FBG strain interrogator based on laser-written 3D scattering structure in flat optical fiber

Femtosecond Laser-Inscribed High-Order Bragg Gratings in Large-Diameter Sapphire Fibers for High-Temperature and Strain Sensing

V-Groove-Based Compact Fbg Package for Thermal Tuning and Mechanical Stability

An optimized strain demodulation method based on dynamic double matched fiber Bragg grating filtering