Abstract:A methodology for evaluating the response of embedded fibre Bragg grating (FBG) sensors in composite structures based on the strain in a host material is introduced. In applications of embedded FBG sensors as strain sensing devices, it is generally assumed that the strain experienced in a fibre core is the same as the one measured in the host material. The FBG sensor is usually calibrated by a strain gauge through a tensile test, centred on obtaining the relationship between the surface strain in the host material and the corresponding Bragg wavelength shift obtained from the FBG sensor. However, such a calibration result can only be valid for uniform strain measurement. When the strain distribution along a grating is non-uniform, average strain measured by the strain gauge cannot truly reflect the in-fibre strain of the FBG sensor. Indeed, the peak in the reflection spectrum becomes broad, may even split into multiple peaks, in sharp contrast with a single sharp peak found in the case of the uniform strain measurement. In this paper, a strain transfer mechanism of optical fibre embedded composite structure is employed to estimate the non-uniform strain distribution in the fibre core. This in-fibre strain distribution is then utilized to simulate the response of the FBG sensor based on a transfer-matrix formulation. Validation of the proposed method is preceded by comparing the reflection spectra obtained from the simulations with those obtained from experiments.

Use of the Stokes Parameters of Fbg for Transverse Strain Sensing and the Optimization of the Grating Structure

Simulation and Reconstruction for Nonuniform Strain Profile of Fiber Bragg Grating Sensor

Spectral Response of Polarization Properties of Fiber Bragg Grating under Local Pressure

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Structure Optimization of Fiber Bragg Grating Strain Sensors

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

Embedded fibre Bragg grating sensors for non-uniform strain sensing in composite structures

Strain measurement in flexibility material using fiber Bragg gratings

Enhanced temperature characteristics of strain-assisted fiber Bragg gratings inscription by femtosecond laser pulses

Numerical Investigation of Stress-Strain State Effects on Strain Measurements with Fiber Bragg Grating Sensors

Temperature-Insensitive Strain Sensor Based on the Measurement of Reflected Bandwidth from Tapered Fiber Grating by A Scanning Fbg

Sensitivity-Tunable FBG Interrogation System Utilizing a Mechanically Induced Long Period Fiber Grating

Point-by-Point Induced High Birefringence Polymer Optical Fiber Bragg Grating for Strain Measurement

In-Fibre Directional Transverse Loading Sensor Based on Excessively Tilted Fibre Bragg Gratings

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

FBG Sensor for Strain Measurement with Enhanced Sensitivity by Using Degenerated FWM in Highly Nonlinear Fibre

Design and Analysis of a Combined FBG Sensor for the Measurement of Three Parameters.

A study on fiber Bragg grating (FBG) strain sensor based on symmetrical lever structure

High-sensitivity stress sensor based on Bragg grating in BDK-doped photosensitive polymer optical fiber

Simulation of Fiber Bragg Grating Using Different Physical Parameters for Investigating the Effectiveness on Strain Sensor Measurements

Analysis of Strain Transfer of Six-Layer Surface-Bonded Fiber Bragg Gratings