Abstract:In the aerospace field, aiming at the requirements of thermal response monitoring of composite structures in space service environment, a monitoring method for carbon fiber honeycomb sandwich structure based on fiber Bragg grating (FBG) reflection spectrum characteristics analysis under different thermal loads was studied. The fiber Bragg grating (FBG) sensors were implanted in different layers of carbon fiber honeycomb sandwich structure respectively. By monitoring the fiber Bragg grating (FBG) reflection spectrums of each layer under different thermal loads, the associated thermal strain characteristics of the honeycomb sandwich structure can be obtained. The results show that, certain differences exist in the thermal strain characteristics of different material layers in the carbon fiber honeycomb sandwich structure. As the temperature increases, the center wavelength of reflection spectrum of fiber Bragg grating (FBG) implanted between the outer skin surface and the glass cloth shifts to the long wave direction and the waveform of the obtained reflection spectrum changes insignificantly. As the temperature decreases, the reflection spectrum of fiber Bragg grating (FBG) implanted between the second and the third layers of the carbon fabric prepreg appears chirp effects gradually, such as sidelobe, multi-peak, etc. The main-peak center wavelength and the right sub-peak center wavelength of the reflection spectrum both shift to the short wave direction gradually. The peak amplitude of the main-peak does not show significant change and its temperature sensitivity is about 5. 56 X 10(-3) dBm . degrees C-1. The peak amplitude of the right sub-peak increases significantly and its temperature sensitivity is about 40. 32 X 10(-3) dBm . degrees C-1. The full width at half maximum(FWHM)of reflection spectrum of fiber Bragg grating (FBG) implanted between the inner skin and the honeycomb core increases gradually at a rate of 3. 19 pm . degrees C-1 with the temperature decreasing. The reflection spectrum appears a multi-peak trend significantly due to the uneven thermal stress distributed between the layers. The interlaminar thermal strain of each implanted layer increases in similar trends within the increasing temperature range of - 70 degrees C to +60 degrees C. But at the temperature range of +60 degrees C to +120 degrees C, the changing trend of the interlaminar thermal strain between each implanted layers shows significant differences. These characteristics can provide useful help to the following on-orbit status monitoring of composite spacecraft structure in space environment.

Technology and test of fiber Bragg grating in composite materials

Applications of Fiber Bragg Grating Sensors in the Composite Industry

In-situ monitoring of carbon fiber/epoxy composite with FBG sensors under curing and thermal cycling conditions

Multi-Directional Strain Measurement in Fiber-Reinforced Plastic Based on Birefringence of Embedded Fiber Bragg Grating

Research on Thermal Load Response Spectrum of FBG Sensors Implanted in Carbon Fiber Honeycomb Sandwich Structure

Development of Fiber Sensors integrated with Aerospace Composites for Structure Health Monitoring

Embedded fibre Bragg grating sensors for non-uniform strain sensing in composite structures

Experimental studies of sensors based on fiber Bragg gratings embedded in the internal structure of composite plates

Assessment of embedded fiber Bragg gratings for structural health monitoring of composites

Structural Nde of Cfrp Composite Materials Using Fiber Bragg Grating Sensors

Dynamic Feature Identification of Carbon-Fiber-Reinforced Polymer Laminates Based on Fiber Bragg Grating Sensing Technology

Fiber Bragg Grating Sensors toward Structural Health Monitoring in Composite Materials: Challenges and Solutions

Strain Measurement for Composite Materials During Mechanical Testing Based on Fiber Bragg Grating Monitoring

Study of Sensing Properties and Contrastive Analysis of Metal Coating Optical Fiber Grating

Monitoring of Composite Structures for Re-Usable Space Applications Using FBGs: The Influence of Low Earth Orbit Conditions

Measurement of process-induced stresses in composite laminates by FBG sensors

Using Embedded Fiber Bragg Grating (FBG) Sensors in Smart Aircraft Structure Materials

Structural Health Monitoring of Composite Laminate for Aerospace Applications via Embedded Panda Fiber Bragg Grating

Review of Femtosecond-Laser-Inscribed Fiber Bragg Gratings: Fabrication Technologies and Sensing Applications

Experiment on Embedding FBG Sensor into Intelligent Metal Structures