Abstract:Composite materials are widely used as repair materials in the oil and gas sector, particularly for vessels, piping, and pipelines. Inspection and monitoring of these composite repairs is a critical aspect of ensuring their integrity and long-term performance. The reason being that failure of composite repairs may lead to loss of production and incur additional costs for re-repair or equipment replacement. Conventionally, a visual inspection is generally performed to observe any irregularities on the external surface of the composite repairs. This will usually be followed by a series of Non-destructive Tests (NDT) to identify the extent of the damage. However, these NDT methods, merely allowing off-line testing in a local manner with complicated and heavy equipment, require extensive and time-consuming labour. Structural Health Monitoring (SHM) based on Fibre Bragg Grating (FBG) that utilizes strain-based signals is one of the best options for monitoring the damage mechanism in composite due to its unique advantages of light weight, high stability and reliability, a long-life cycle, and the ability to capture the online reading. In this paper, the application of the FBG monitoring approach was used to examine the strain characteristics of composite materials based on mechanical tests (tensile and flexural). Three types of samples were prepared to simulate the type of damage mechanism: healthy, delamination, and disbondment. Based on the results, it was shown that the FBG sensor has potential for detecting and distinguishing the types of failure mechanisms in composites, including cracks, delamination, and disbondment. Hence, it was suggested that the FBG sensor technology could be used for site deployment in industry.

Measurement of process-induced stresses in composite laminates by FBG sensors

CURE MONITORING OF COMPOSITES USING FIBER BRAGG GRATING SENSORS

In-situ monitoring of carbon fiber/epoxy composite with FBG sensors under curing and thermal cycling conditions

Simultaneous measurement of strain and temperature during and after cure of unsymmetric composite laminate using fiber-optic sensors

Novel development of fiber Bragg grating in monitoring composite laminates

Curing Process and Quasi-Static Compression Monitoring of Stiffened Composite Panels with Embedded FBG Sensors

Monitoring of the Resin Transfer Molding Process Using Fiber Bragg Gratings Sensors

Application of Fiber Bragg Grating Sensors in Monitoring Curing Process of Carbon Fiber Composite

Real-time cure monitoring of smart composite materials using extrinsic Fabry-Perot interferometer and fiber Bragg grating sensors

In-situ quantification of manufacturing-induced strains in fiber metal laminates with strain gages

Structural Health Monitoring of Smart Composite Materials by Using EFPI and FBG Sensors

Condition Health Monitoring of Composite Wound Pressure Vessels Using Fiber Bragg Gratings

Monitoring of Cure Strain on the Interface Between Filament Wound Composites and Aluminum Plate Using FBG

Strain Measurement for Composite Materials During Mechanical Testing Based on Fiber Bragg Grating Monitoring

Sensing Characteristics of FBG Sensor Embedded in CFRP Laminate

Structural Nde of Cfrp Composite Materials Using Fiber Bragg Grating Sensors

Study of Monitoring CF3052 /5224 Composites Molding Process by Optical Fiber Bragg Grating

Monitoring of the Carbon Fiber Wound Composites Curing Process Based on FBG Sensors.

Monitoring and Controlling Manufacturing for Composite Using Fiber Bragg Grating

FATIGUE PROCESS MONITORING FOR COMPOSITE LAMINATES WITH FIBER BRAGG GRATINGS

In-situ Cure Monitoring of Thick CFRP Using Multifunctional Piezoelectric-Fiber Hybrid Sensor Network