Abstract:Composite materials are widely used as repair materials in the oil and gas sector, particularly for vessels, piping, and pipelines. Inspection and monitoring of these composite repairs is a critical aspect of ensuring their integrity and long-term performance. The reason being that failure of composite repairs may lead to loss of production and incur additional costs for re-repair or equipment replacement. Conventionally, a visual inspection is generally performed to observe any irregularities on the external surface of the composite repairs. This will usually be followed by a series of Non-destructive Tests (NDT) to identify the extent of the damage. However, these NDT methods, merely allowing off-line testing in a local manner with complicated and heavy equipment, require extensive and time-consuming labour. Structural Health Monitoring (SHM) based on Fibre Bragg Grating (FBG) that utilizes strain-based signals is one of the best options for monitoring the damage mechanism in composite due to its unique advantages of light weight, high stability and reliability, a long-life cycle, and the ability to capture the online reading. In this paper, the application of the FBG monitoring approach was used to examine the strain characteristics of composite materials based on mechanical tests (tensile and flexural). Three types of samples were prepared to simulate the type of damage mechanism: healthy, delamination, and disbondment. Based on the results, it was shown that the FBG sensor has potential for detecting and distinguishing the types of failure mechanisms in composites, including cracks, delamination, and disbondment. Hence, it was suggested that the FBG sensor technology could be used for site deployment in industry.

Monitoring of Cure Strain on the Interface Between Filament Wound Composites and Aluminum Plate Using FBG

CURE MONITORING OF COMPOSITES USING FIBER BRAGG GRATING SENSORS

In-situ monitoring of carbon fiber/epoxy composite with FBG sensors under curing and thermal cycling conditions

Monitoring of the Carbon Fiber Wound Composites Curing Process Based on FBG Sensors.

Study of Monitoring CF3052 /5224 Composites Molding Process by Optical Fiber Bragg Grating

Cure monitoring of epoxy resin via use of FBG

Application of Fiber Bragg Grating Sensors in Monitoring Curing Process of Carbon Fiber Composite

Measurement of process-induced stresses in composite laminates by FBG sensors

In-Situ Monitoring of Curing and Ageing Effects in Frp Plates Using Embedded Fbg Sensors

Simultaneous measurement of strain and temperature during and after cure of unsymmetric composite laminate using fiber-optic sensors

Monitoring of the Resin Transfer Molding Process Using Fiber Bragg Gratings Sensors

FBG monitoring results analysis for fabrication processing of FRP bars

Real-time cure monitoring of smart composite materials using extrinsic Fabry-Perot interferometer and fiber Bragg grating sensors

Monitoring for Residual Strain of Resin Cure During the Process of RTM Composites

Curing Process and Quasi-Static Compression Monitoring of Stiffened Composite Panels with Embedded FBG Sensors

Investigation of Strain History in Fast and Conventional Curing Epoxy Matrix Composites by FBGs

Magnetic Fiber Enabled Curing Electrogram: Real-time Process Monitoring for Thermosetting Polymer Materials

Monitoring and Controlling Manufacturing for Composite Using Fiber Bragg Grating

Strain Measurement for Composite Materials During Mechanical Testing Based on Fiber Bragg Grating Monitoring

The Structural Performance of CFRP Composite Plates Assembled with Fiber Bragg Grating Sensors

On-line Cure Monitoring of Phenol Formaldehyde Resin Using Embedded Fiber Bragg Grating Sensor