Abstract:The mineralogical and chemical changes in Chinese Xinjiang iron ore containing impurities, lead, and zinc as a result of reduction roasting were studied via chemical analysis, optical microscopy, X-ray fluorescence (XRF), electron probe microanalysis (EPMA), and energy-dispersive spectroscopy (EDS). Analysis showed that hematite was the main iron-bearing mineral, with small amounts of magnetite and iron silicate; lead impurities were mainly lead oxide and lead–iron alum, while zinc oxide was the main zinc impurity. X-ray fluorescence analysis for raw samples indicated the presence of quartz, hematite, magnetite, chlorite, calcite, and dolomite. The results of the analysis of roasted samples showed an increase in hematite at temperatures of 750 °C and 950 °C, while the elemental iron increased at a temperature of 1200 °C, along with the conversion of galena to lead oxide and sphalerite to zinc oxide, with a stable quartz ratio. The chemical analysis of the raw sample showed that the TFe grade of the sample was 47.04%, while the contents of harmful Pb and Zn impurities were 0.39% and 0.30%, respectively, both of which exceed the index (less than 0.10%) required by the iron industry for raw materials. The content of harmful sulfur impurities was also high, at 1.19%, which needs to be eliminated or reduced. The results of EPMA and EDS analysis of pre-roasting raw samples showed that chemical compositions vary in different locations in the hematite, magnetite, sphalerite, and galena micro-zones. It has also been observed that quartz is mostly diffused with magnetite and hematite, and sulfur appears in small quantities in most regions. The analysis after roasting showed that the percentages of lead, zinc, and sulfur impurities decreased by a large rate. It is clear that the roasting process plays a major role in removing impurities such as sulfur, which appears in a small percentage after the roasting process, and also helps in oxidizing the impurities of lead and zinc, which helps in removing them.

Research on Separating Tin and Iron from Tin-bearing Iron Concentrate by CO Reduction

Separation and Recovery of Iron and Nickel from Low-Grade Laterite Nickel Ore by Microwave Carbothermic Reduction Roasting

Selective separation and recovery of iron and tin from high calcium type tin- and iron-bearing tailings using magnetizing roasting followed by magnetic separation

Tin separation and recovery using the successive conversion of the self-possessed sulfur from low-grade tin middling

Experiment on Reducing Agent for Recovering Iron from Pyrite Sulfur Refining Slag by Reduction Roasting and Magnetic Separation

Selective separation of tin from tin-bearing middling via sulfur roasting

Experimental Research on Rducting Roasting and Low Intensity Magnetic Separation of a Refractory High Al-Si Iron Ore

Experiments on the Coal-based Direct Reduction-Magnetic Separation of a Refractory Iron Ore

Separation of Zinc from Zinc Ferrite by Magnetization Roasting and Ammonia Leaching

A new approach for recycling arsenic and tin from low-grade tin middlings using a self-sulfurization roasting

Novelty on deep reduction roasting through removal of lead and zinc impurities from iron ore afore ironmaking

Removal of arsenic and recovery of tin from arsenic-containing multi-metallic materials by vacuum reduction roasting

Sn recovery from a tin-bearing middling with a high iron content and the transformation behaviours of the associated As, Pb, and Zn

Mineralogical and Chemical Changes after Reduction Roasting of Xinjiang Iron Ore, China

The Preparation of High-Purity Iron (99.987%) Employing a Process of Direct Reduction–Melting Separation–Slag Refining

Selective hydrogen reduction of binary iron-cobalt chlorides

Probing Study on Separating Pb, Zn, and Fe from Lead Slag by Coal-based Direct Reduction

Study on Separation of Niobium and Iron from Low Grade Niobium Ore

A Novel Technology for the Recovery and Separation of Cassiterite- and Iron-Containing Minerals from Tin-Containing Tailing

Research on the effect of additive on selective reduction of the laterite ores with low nickel and high iron content

Reduction Behavior and Mechanism of Iron Ore in Molten Iron in the Process of Converter Steelmaking