Reductive behavior of nickel and iron metallization in magnesian siliceous nickel laterite ores under the action of sulfur-bearing natural gas
Zhien He,Bo Li,Yonggang Wei
DOI: https://doi.org/10.1515/htmp-2022-0309
2024-01-01
High Temperature Materials and Processes
Abstract:Abstract This study is a process for the preparation of advanced nickel–iron alloys by selective reduction of nickel-poor laterite ores using a variety of reducing agents. The first part of the experiment was the reduction of nickel laterite ore using natural gas; the reduction yielded mostly nickel metal and a small amount of iron forming fine nickel–iron particles. Fine nickel–iron particles are formed through the reduction of nickel and a small amount of iron oxides. These particles are dispersed and embedded within silicates. Additionally, H 2 S present in natural gas reacts with iron oxide, resulting in the formation of FeS. This, in turn, forms a low melting point eutectic with Fe, which reduces surface tension and promotes the growth and aggregation of nickel–iron particles. This study aimed to investigate the effects of various parameters such as roasting temperature, roasting time, natural gas concentration, and nickel laterite pellet on the formation and aggregation of ferronickel particles in low-grade nickel laterite ores. The results showed that the optimum reduction parameters were achieved at 900°C, 120 min, 40% natural gas concentration, and 40–60 mesh nickel laterite size, with roasting temperature being the most important factor followed by natural gas concentration, roasting time, and nickel laterite pellet. Using these parameters, the metallization rates of Ni and Fe were found to be as high as 95.3 and 8.5%, respectively.
materials science, multidisciplinary