Abstract:China has rich reserves of Shenmu coal, which has the typical characteristic of low-melting-point ash. If used in the pulverized-coal boiler of a power plant, Shenmu coal would cause serious slagging. In order to solve the slagging problem of Shenmu coal, the melting mechanism of Shenmu coal ash is studied in detail in this paper. One of the Shenmu coals - Wenjialiang coal - was selected for the study. On the basis of thermogravimetry-differential scanning colorimetry (TG-DSC) methods, the change of the coal ash's physicochemistry with temperature was studied. The typical temperature points in the melting process were obtained. Ash samples of the different temperature points were prepared in a high-temperature furnace with parameters similar to those used in the TG-DSC test, and were then cooled quickly in water. Later, the ash samples were analyzed using X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDX) methods in detail. Wenjialiang coal ash started to melt at 980 degrees C. The ash was found to melt to a great extent at 1200 degrees C and formed a multiform microstructure. At 1260 degrees C, it was found to melt into a dense body with many pores, and formed a piece of vitreous body at 1340 degrees C. Anorthite and gehlenite are the intermediate products that exist between 980 and 1340 degrees C. They may be the main cause of the ash having low melting points, so that they could convert into a eutectic at low temperatures. (c) 2007 Curtin University of Technology and John Wiley & Sons, Ltd.

MICROSTRUCTURE OF SELF-DESULFURIZATION RESIDUE OF HUANGLING COAL ASH IN COMBUSTION

Microstructures of Self-Desulfurization Residue of Shenmu Coal Ash in Combustion

Crystal Compositions of Self-Desulfurization Residues from a Pulverized Coal Fired Boiler

The Desulfurization Behavior of Mineral Matter in Ash During Coal Combustion at High Temperature

Microstructures Of Chinese Coal Ashes Derived From Combustion

A Study of High-temperature Self-desulfurization of Calcium-based Mineral in Shenmu Coal

Phase Transformation of High Alkaline Ash Residue on the Process of Sintering and Fusion

The influences of high-temperature phase on coal self-desulphurization

Transformations and Affinities for Sulfur of Chinese Shenmu Coal Ash in a Pulverized Coal-Fired Boiler

Microstructure Characteristics and Desulphurization of Nano-Caco_3 During Coal Combustion

Microanalysis of solid residues from coal slurry fired furnace

Physicochemical Properties of Chinese Pulverized Coal Ash in Relation to Sulfur Retention

Sub-particle Scale Study on the Melting Behavior of Zhundong Coal Ash Based on the Heterogeneous Distribution of Elements

Study on the Coal Ash Fusibility During Blending Coal Combusition

Research on Behavior of Sulfation Product at High Temperature

Ash Deposition and Inorganic Element Transformation During Zhundong Coal Combustion

Auto-Sulfur Retention Property of High-Calcium Coal Fired in Large Utility Pulverized Coal Fired Boilers

High-temperature Desulfurization of Carbide Slag and Bauxite During Coal Combustion

Mineral Conversion and Microstructure Change in the Melting Process of Shenmu Coal Ash

A Mechanism Study On The Decomposition Of Sulfate In Zhundong Coal With High Sulfur Content In Coal Ash

Pyrolyzing coal blended with ash: the fate and impacts of CaSO 4