Abstract:Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Ahead of Print. Due to the deep stage of oxygen, the pulverized coal cannot be burned completely in the primary combustion zone, resulting in a high content of residual carbon. The residual carbon in ash has a potential effect on the melting characteristics of ash, while there is a lack of specific research on the effects of residual carbon on ash fusion characteristics of high-alkali coals. In the present study, synthetic ash was blended with residual carbon to study the impacts of residual carbon content, graphitization level of the carbon, and atmospheric condition on ash fusion characteristics. Thermogravimetric analyzers and ash melting point testers were used to study the thermogravimetric behavior of ash and the characteristic temperatures of ash fusion, and then analyze the changes in the mineral composition and micromorphology of slag using X-ray diffractometers and scanning electron microscopy. The experimental results reveal that the change in residual char content exerts a minor influence on the type of crystalline minerals within the ash, while it affects the relative content of various minerals. The softening temperature of the ash blended with activated carbon and graphite are 1234°C and 1242°C, respectively. The blending of activated carbon greatly promotes the generation of gehlenite (Ca2Al2SiO7, 1593°C) and inhibits the generation of merwinite (Ca3MgSi2O8, 1550°C), increasing the ash melting temperature. The ash fusion characteristic temperatures of the pure synthetic ash decrease with the enhancement of the reductive atmosphere. However, the ash fusion characteristic temperatures of the ash blended with carbon in strong reducing atmosphere are increased compared to those in weak reducing atmosphere because part of the carbon acts as a skeleton or reacts to form a carbon-silicon compound. The present study can offer improved knowledge to provide fundamental support for the combustion and utilization of high-alkali Zhundong coal under deep oxygen-staged conditions.

The Desulfurization Behavior of Mineral Matter in Ash During Coal Combustion at High Temperature

Effect of Chemical Compositions on Ash Fusibility Characterization of a Jincheng Anthracite During Combustion and Gasification

Quantitative analysis of minerals of blended coal ash at high temperature and its influence on slagging

Mineral transformation during rapid heating and cooling of Zhundong coal ash

Study on the Coal Ash Fusibility During Blending Coal Combusition

High-temperature Desulfurization of Carbide Slag and Bauxite During Coal Combustion

Microstructures of Self-Desulfurization Residue of Shenmu Coal Ash in Combustion

Thermodynamic Analysis of Ash Mineral Phases in Combustion of High-Sulfur Coal with Lime

Effect of Al2O3/CaO on the melting and mineral transformation of Ningdong coal ash

The influences of high-temperature phase on coal self-desulphurization

Effect of Coal Ash on the Reduction and Roasting Processes of Phosphogypsum

Experimental Study on Combustion Desulfurization of Sludge Coal Water Slurry

Experiments and Modeling of Ash Mineral Evolution in Burning High-Sulfur Coal with Lime

Ash Fusion Regulation Mechanism of Coal with Low Melting Point and Different Ash Compositions

Mineral Conversion of Coal-ash in Fusing Process and the Influence to Ash Fusion Point

MICROSTRUCTURE OF SELF-DESULFURIZATION RESIDUE OF HUANGLING COAL ASH IN COMBUSTION

Effect of different additives on ash fusion characteristic and mineral phase transformation of iron-rich Zhundong coal

Experimental study on the effects of residual carbon on ash fusion characteristics of high-alkali Zhundong coal under deep oxygen-staged condition

Effect of combustion heat on release and transformation of the sodium during Zhundong coal ash-forming process

Microstructure Characteristics and Desulphurization of Nano-Caco_3 During Coal Combustion

Fusion Characteristics of Coal Ash from Pulverized Coal-fired Boilers for Cogeneration of Cement Clinker