Abstract:Lead-free perovskite CaCu3Ti4O12 (CCTO) dielectrics are extremely important candidates for capacitor–varistor dual-function materials. However, their overall success in applications is somewhat controlled by the longstanding issues such as relatively large dielectric loss and insufficiently high electric breakdown field. Herein, we report the success in the preparation of an optimized lead-free (1–x)CaCu3Ti4O12–xSrTiO3 (CCTO–STO) composite system with improved dielectric and nonlinear properties via interface engineering. Interestingly, looking closer at the grain boundaries using transmission electron microscopy, it is found that an obvious interface region with a transition layer of a wrinkled structure is formed between the CCTO matrix phase and STO dopant phase. Significantly, all the composite ceramic samples present high permittivity in the order of about 103 to 104, and the 0.9CCTO–0.1STO composite ceramic sample exhibits a lower dielectric loss of about 0.068 at room temperature and at 1 kHz. Excitingly, the optimized 0.9CCTO–0.1STO composite ceramic sample also exhibits a remarkably elevated breakdown field strength of about 14.03 kV/cm and a large nonlinear coefficient of about 16.11. The improvement in nonlinear properties with a high breakdown field strength and large nonlinear coefficient could be attributed to the interfacial effect in the composite structure, originating from the formation of the transition layer with a wrinkle structure at the interface between CCTO and STO phases. Such effects can result in great electrical heterogeneity caused by the higher resistance of the grain boundary and the enhanced potential barrier at the interface region. The new insights on the formation of the interfacial wrinkle structure near the phase boundaries of the CCTO–STO composite system and their effects on improvement of electrical properties can stimulate future research on lead-free CCTO–STO-based systems toward capacitor–varistor dual-function applications and may offer an effective way to design other lead-free dielectric materials as well.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13067?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13067</a>.XRD patterns of STO and CCTO powders, STEM image of interface structure and STEM elements mapping, as well as the corresponding EDS line-scanning results across the interface for the composite samples with x = 0.05, TEM images of a transition layer with the wrinkle structure at the interface region for the sample with x = 0.30, and dielectric constant, dielectric loss, imaginary parts of dielectric constant, and electric modulus as a function of temperature, relaxation activation energy as well as complex impedance plots under different temperature for CCTO–STO composite ceramic samples (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13067/suppl_file/am0c13067_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Towards Enhanced Varistor Property and Lower Dielectric Loss of Cacu3ti4o12 Based Ceramics

Dielectric And Varistor Properties Of Rare-Earth-Doped Zno And Cacu3ti4o12 Composite Ceramics

Enhanced Breakdown Field in Cacu3ti4o12 Ceramics: Effect of In-Situ Secondary Phase

High Dielectric and Nonlinear Electrical Behaviors in Tio2-Rich Cacu3ti4o12 Ceramics

Effect of Holding Time on the Dielectric Properties and Non-Ohmic Behavior of CaCu3Ti4O12 Capacitor-Varistors

Giant Permittivity Response and Enhanced Nonlinear Electrical Properties in a Novel Perovskite-Like Ceramic with Multiple Elements

Excellent Capacitor–Varistor Properties in Lead-Free CaCu 3 Ti 4 O 12 –SrTiO 3 System with a Wrinkle Structure via Interface Engineering

Optimized Dual-Function Varistor-Capacitor Ceramics of Core-Shell Structured Xbi2/3cu3ti4o12/(1-X)cacu3ti4o12 Composites

Excellent Capacitor-Varistor Properties in Lead-Free CaCu3Ti4O12-SrTiO3 System with a Wrinkle Structure Via Interface Engineering

Dielectric and Varistor Behavior of CaCu3Ti4O12–MgTiO3Composite Ceramics

Decrease of Dielectric Loss in Giant Dielectric Constant CaCu3 Ti4 O12 Ceramics by Adding CaTiO3

Enhanced breakdown strength and dielectric loss of Ca1−3x/2EuxCu3Ti4O12 ceramics prepared by polymer pyrolysis

Modification of the dual-function varistor-capacitor properties of Bi2/3Cu3Ti4O12 ceramic by doping with Sr0.99La0.01TiO3

An Effective Method to Decrease Dielectric Loss of CaCu3Ti4O12 Ceramics

Electric and Dielectric Behaviors of Y-Doped Calcium Copper Titanate: Rapid Communications of the American Ceramic Society

Synergistic optimization of nonlinear current–voltage characteristics and dielectric properties in Mg-doped CaCu3Ti4O12-Y2/3Cu3Ti4O12 composites

Significantly Enhanced Breakdown Field in Ca1-xSrxCu3Ti4O12 Ceramics by Tailoring Donor Densities

Improved grain boundary resistance inducing decreased dielectric loss and colossal permittivity in Y2/3Cu3Ti4O12 ceramics

Dielectric and Nonlinear Current–voltage Characteristics of Rare–earth Doped CaCu3Ti4O12 Ceramics

Giant Dielectric Permittivity and Non-Linear Electrical Behavior in CaCu3Ti4O12 Varistors from the Molten-Salt Synthesized Powder

The Novel Effects of Cu-deficient on the Dielectric Properties and Voltage–current Nonlinearity in CaCu3Ti4O12 Ceramics