Abstract:Lead-free perovskite CaCu3Ti4O12 (CCTO) dielectrics are extremely important candidates for capacitor–varistor dual-function materials. However, their overall success in applications is somewhat controlled by the longstanding issues such as relatively large dielectric loss and insufficiently high electric breakdown field. Herein, we report the success in the preparation of an optimized lead-free (1–x)CaCu3Ti4O12–xSrTiO3 (CCTO–STO) composite system with improved dielectric and nonlinear properties via interface engineering. Interestingly, looking closer at the grain boundaries using transmission electron microscopy, it is found that an obvious interface region with a transition layer of a wrinkled structure is formed between the CCTO matrix phase and STO dopant phase. Significantly, all the composite ceramic samples present high permittivity in the order of about 103 to 104, and the 0.9CCTO–0.1STO composite ceramic sample exhibits a lower dielectric loss of about 0.068 at room temperature and at 1 kHz. Excitingly, the optimized 0.9CCTO–0.1STO composite ceramic sample also exhibits a remarkably elevated breakdown field strength of about 14.03 kV/cm and a large nonlinear coefficient of about 16.11. The improvement in nonlinear properties with a high breakdown field strength and large nonlinear coefficient could be attributed to the interfacial effect in the composite structure, originating from the formation of the transition layer with a wrinkle structure at the interface between CCTO and STO phases. Such effects can result in great electrical heterogeneity caused by the higher resistance of the grain boundary and the enhanced potential barrier at the interface region. The new insights on the formation of the interfacial wrinkle structure near the phase boundaries of the CCTO–STO composite system and their effects on improvement of electrical properties can stimulate future research on lead-free CCTO–STO-based systems toward capacitor–varistor dual-function applications and may offer an effective way to design other lead-free dielectric materials as well.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13067?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13067</a>.XRD patterns of STO and CCTO powders, STEM image of interface structure and STEM elements mapping, as well as the corresponding EDS line-scanning results across the interface for the composite samples with x = 0.05, TEM images of a transition layer with the wrinkle structure at the interface region for the sample with x = 0.30, and dielectric constant, dielectric loss, imaginary parts of dielectric constant, and electric modulus as a function of temperature, relaxation activation energy as well as complex impedance plots under different temperature for CCTO–STO composite ceramic samples (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13067/suppl_file/am0c13067_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Dielectric and Varistor Behavior of CaCu3Ti4O12–MgTiO3Composite Ceramics

Dielectric And Varistor Properties Of Rare-Earth-Doped Zno And Cacu3ti4o12 Composite Ceramics

Dielectric Properties and IV Characteristic of CaCu_3Ti_4O_(12)-MgTiO_3 Composite Ceramic Synthesized by Sol-Gel Method

Synergistic optimization of nonlinear current–voltage characteristics and dielectric properties in Mg-doped CaCu3Ti4O12-Y2/3Cu3Ti4O12 composites

Dielectric Behavior of (1-X)BaTiO<sub>3</sub>-XCaCu<sub>2.94</sub>Mn<sub>0.06</sub>Ti<sub>4</sub>O<sub>12</sub> Composite Ceramics

Study of Electrical Conduction Mechanisms of CaCu3Ti4O12–MgAl2O4 Composite Ceramics with NTC Effect Via In-Situ XPS and Complex Impedance Analysis

High Dielectric and Nonlinear Electrical Behaviors in Tio2-Rich Cacu3ti4o12 Ceramics

Dielectric Behavior of (1-X)batio<sub>3</sub>-xcacu<sub>2.94</sub>mn<sub>0.06</sub>ti<sub>4</sub>o<sub>12</sub> Composite Ceramics

Microstructure and electrical properties of sol–gel derived Ni-doped CaCu3Ti4O12 ceramics

Dielectric properties of Poly(vinylidene fluoride) / CaCu3Ti4O12 composites

Excellent Capacitor–Varistor Properties in Lead-Free CaCu 3 Ti 4 O 12 –SrTiO 3 System with a Wrinkle Structure via Interface Engineering

Grain Boundary Behavior in Varistor-Capacitor Tio2-Rich Cacu3ti4o12 Ceramics

New BST -Based Ceramics for High Voltage Capacitors

Hierarchical-structured Dielectric Permittivity and Breakdown Performances of Polymer-Ceramic Nanocomposites

Dielectric tunable properties of Ba0.5Sr0.5TiO3–Li2Mg3TiO6–Mg2TiO4 composite ceramics

Enhanced breakdown strength and dielectric loss of Ca1−3x/2EuxCu3Ti4O12 ceramics prepared by polymer pyrolysis

Decrease of Dielectric Loss in Giant Dielectric Constant CaCu3 Ti4 O12 Ceramics by Adding CaTiO3

Realizing ultrahigh breakdown strength and ultrafast discharge speed in novel barium titanate-based ceramics through multicomponent compounding strategy

The effect of CeO2 on the electric properties of TiO2 based capacitor-varistor multi-function ceramics

Preparation and Wide-Frequency Dielectric Properties of (ba0.5sr0.4ca0.1)tio3/poly(vinylidene Fluoride) Composites

Microstructures and dielectric properties of spark plasma sintered Ba0.4Sr0.6TiO3/CaCu3Ti4O12 composite ceramics