Abstract:With the rapid development of electronic technology and large-scale integrated circuit devices, it is very important to develop thermal management materials with high thermal conductivity. Silicon carbide whisker-reinforced copper matrix (Cu/SiCw) composites are considered to be one of the best candidates for future electronic device radiators. However, at present, most of these materials are produced by high-temperature and high-pressure processes, which are expensive and prone to interfacial reactions. To explore the plating solution system suitable for SiCw and Cu composite electroplating, we tried two different Cu-based plating solutions, namely a Systek UVF 100 plating solution of the copper sulfate (CuSO4) system and a Through Silicon Via (TSV) plating solution of the copper methanesulfonate (Cu(CH3SO3)2) system. In this paper, Cu/SiCw composites were prepared by composite electrodeposition. The morphology of the coating under two different plating liquid systems was compared, and the mechanism of formation of the different morphologies was analyzed. The results show that when the concentration of SiCw in the bath is 1.2 g/L, the surface of the Cu/SiCw composite coating prepared by the CuSO4 bath has more whiskers with irregular distribution and the coating is very smooth, but there are pores at the junction of the whiskers and Cu. There are a large number of irregularly distributed whiskers on the surface of the Cu/SiCw composite coating prepared with the copper methanesulfonate (Cu(CH3SO3)2) system. The surface of the composite is flat, and Cu grows along the whisker structure. The whisker and Cu form a good combination, and there is no pore in the cross-section of the coating. The observation at the cross-section also reveals some characteristics of the toughening mechanism of SiCw, including crack deflection, bridging and whisker pull-out. The existence of these mechanisms indicates that SiCw plays a toughening role in the composites. A suitable plating solution system was selected for the preparation of high-performance Cu/SiCw thermal management materials with the composite electrodeposition process.

Dual Effects of CTAB on Co-deposition of SiC/Cu in Micro Via

Influence of Electroplating Current Density on Through Silicon Via Filling

Effects of Surfactants SDS and CTAB on Ni-SiC Deposition

Cold-sprayed Cu Matrix Composite Coatings with Core-Shell Structured Co@WC Reinforcements on Q235 Steel

Carbon Nanotube/Copper composites for via filling and thermal management

The Effect of Inhibitors on the Electrochemical Deposition of Copper Through-silicon Via and its CMP Process Optimization

Copper Chemical Mechanical Polishing and Wafer Thinning with Temporary Bonding for Through Silicon Via Interconnect

Improvement of Via Dishing and Non-Uniformity in TSV Chemical Mechanical Planarization

Morphology Control and Mechanism of Different Bath Systems in Cu/SiCw Composite Electroplating

Study on the dual inhibition behavior of interfacial IMCs in Cu/SAC105/Cu joint by adopting SiC nanowires and nanocrystalline Cu substrate

Effective method to disperse and incorporate Carbon nanotubes in electroless Ni-P deposits

Experiment and simulation of single inhibitor SH110 for void-free TSV copper filling

Regulating the mechanical properties and electrical conductivity of CNTs/Cu composites by tailoring nano-sized TiC on the surface of intact CNTs

1-Dodecyl-2-methyl-3-benzylimidazolium chloride as a novel leveler: Towards simultaneously both the microvia void-free filling and through hole conformal thickening

Effect Interfacial Size and Multiple Interface on Electromagnetic Shielding of Silicon Rubber/Carbon Nanotube Composites with Mixing Segregated Particles

Interfacial characteristics in CNTs-AgCuTi systems

Investigations of the electrochemical performance and filling effects of additives on electroplating process of TSV

Understanding Effect of Additives in Copper Electroplating Filling for Through Silicon Via

CNT-BCB Composites As a Bonding Interface Material for 3D Integration

Optimization of the mechanical properties of CNTs/Cu composite by regulating the size of interfacial TiC

Effect of Pretreatment Modes of Silicon Carbide Nanoparticulates on the Properties of Electroplated Ni-SiC Nanocomposite Coatings