Abstract:A high-Cu-content-mixed solder paste comprising Sn–3.0Ag–0.5Cu (SAC305) + 20 wt% Sn– x Cu ( x = 3, 5, 8, and 10) was prepared in this study. The melting characteristics, wetting properties, liquid solder joint fluidity, melt viscosity, and surface tension of the mixed solder paste as well as the interfacial reaction mechanism and the shear properties of the mixed solder joints were investigated. The findings indicate that during the initial reflow, the solderability and wettability of the mixed solder paste are comparable to those of SAC305. However, during the second reflow, the overflow capability of the solder joint is restrained. Additionally, after the initial reflow, the mixed solder joint becomes a high Cu alloy, its composition deviates from the Sn–Ag–Cu eutectic point, and the liquidus temperature increases when remelted. For example, the liquidus temperature of SAC305 + 20 - wt% Sn–10Cu is 71 °C higher than that of SAC305 (225.7 °C) during the second heating. Furthermore, during the second reflow process, the increased liquidus temperature of the mixed solder joints leads to higher melt viscosity and surface tension. The surface tension of the SAC305 + 20 - wt% Sn–10Cu liquid alloy is 235.73 times that of SAC305, while the fluidity of the solder joints is restrained. In addition, a thin intermetallic compound (IMC) layer with larger grain is formed at the Cu/solder interface in the mixed solder joints. The thickness of the IMC layers at the Cu/solder interface in the mixed solder joints are as follows: 2.63 μm for SAC305 + 20 - wt% Sn–3Cu, 1.87 μm for SAC305 + 20 - wt% Sn–5Cu, 2.19 μm for SAC305 + 20 - wt% Sn–8Cu, and 2.21 μm for SAC305 + 20 - wt% Sn–10Cu. All of these values are lower than the thickness of the IMC layer in SAC305 (3.39 μm). In addition, we found that the addition of reinforced particles did not reduce the shear strength of the solder joints after multiple reflows. The shear strength of SAC305, SAC305 + 20 - wt% Sn–3Cu, SAC305 + 20 - wt% Sn–5Cu, SAC305 + 20 - wt% Sn–8Cu, and SAC305 + 20 - wt% Sn–10Cu were 43.04, 42.69, 43.10, 43.19, and 43.77 MPa, respectively, and all solder joints exhibited ductile fracture after shear tests.

Study on the dual inhibition behavior of interfacial IMCs in Cu/SAC105/Cu joint by adopting SiC nanowires and nanocrystalline Cu substrate

Significant Inhibition of Interfacial Cu6sn5 Imc and Improvement of Solder Joint Strength and Reliability by Applying (111) Nanotwinned Cu Substrate and Vacuum Soldering

Interfacial structures and mechanical properties of Cu/Sn/Cu containing SiC nanowires under transient liquid phase bonding

Microstructure evolution and growth behavior of Cu/SAC105/Cu joints soldered by thermo-compression bonding

Accelerated solid-liquid interdiffusion bonding of Cu joint using a Cu10Ni alloy mesh reinforced SAC305 composite solder

Effect of Nano-Cu 6 Sn 5 upon development mechanism of Cu–Ni–Sn compounds and mechanical characteristics for mixed solder joints

In-situ fusion process and Cu–Sn compounds evolution mechanism of nano-intermetallic compound mixed solder joints

Effect of Nano-Cu6Sn5 Upon Development Mechanism of Cu–Ni–Sn Compounds and Mechanical Characteristics for Mixed Solder Joints

Interfacial Reaction of Cu/SAC105/Cu Solder Joints Reinforced with Ti Nanoparticles under Vacuum Thermo-Compression Bonding

Intermetallic compound evolution and mechanical properties of Cu/Sn58Bi/Cu 3D structures blended with B 4 C nanoparticles during isothermal aging

Ni mesh-reinforced ultrasonic-assisted Cu/Sn58Bi/Cu joint performance: Experiments and first-principles calculations

Influences of silicon carbide nanowires’ addition on IMC growth behavior of pure Sn solder during solid–liquid diffusion

Effects of Joint Height on the Interfacial Microstructure and Mechanical Properties of Cu-Cored SAC305 Solder Joints

Study on the Interfacial IMCs Growth of Nt-Cu/in Solder Joints

Mechanical Property Of Cu-Sn-Ni Intermetallics In The Full Intermetallic Micro-Joints Formed With Transient Liquid Phase Soldering

Microstructural evolution of Cu–Sn–Ni compounds in full intermetallic micro-joint and in situ micro-bending test

Performance and interfacial reaction mechanism of nano-IMC-mixed solder paste with variable melting point

Rapid formation, grain refinement and shear property of high-temperature-stable full IMC joints

The Growth of Interfacial IMC Layer in SAC0307 Solder Joints with Specific Grain Orientation Under Electrical and Thermal Coupling Fields

Effect of Intermetallic Compounds on Mechanical Properties of Copper Joints Ultrasonic-Soldered with Sn-Zn Alloy

Low-temperature Interconnection and Strengthening Mechanism of Cu/Cu Joint with SAC Particles Solders