Abstract:Ni–SiC nano-composite coating, which simultaneously composed of both nanocrystalline consecutive Ni matrix and dispersed inert SiC nano-particles, has been fabricated by ultrasonic electroplating technique from a modified Watts bath containing SiC nano-particles. The influence of mechanical stirring and ultrasonication on the surface morphology of the nanocrystalline Ni–SiC nano-composite film has also been investigated. The surface morphology, microstructure, anti-corrosion property and electrocatalytic activity for hydrogen evolution of the obtained nanocrystalline Ni–SiC nano-composite film, are characterized using scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS) system, atomic force microscopy (AFM), transmission electron microscope (TEM), X-ray diffraction (XRD) and electrochemical impedance spectroscopy (EIS) techniques. The results find that, mechanical stirring mainly prevents the sedimentation of the inert particles suspended in solutions, while ultrasonication mainly prevents the particles agglomeration. In the case of only mechanical stirring to disperse the SiC nano-particles, the composite surface is cauliflower alike. While in the case of both mechanical stirring and ultrasonication, the obtained Ni–SiC composite film is much smoother and composes of particles with the mean diameter of 42.9nm, and SiC particles are uniformly dispersed into Ni matrix. Meanwhile, the results obtained by polarization curves and EIS methods show that, when compared with the traditional polycrystalline Ni film, the obtained Ni–SiC nano-composite film exhibits the enhanced corrosion resistance in NaCl solutions, possesses much higher electrocatalytic activity for hydrogen evolution in KOH solutions.

Effect of Pretreatment Modes of Silicon Carbide Nanoparticulates on the Properties of Electroplated Ni-SiC Nanocomposite Coatings

CORROSION BEHAVIOR OF THE Ni-SiC NANOCOMPOSITE COATINGS

A Study on the Electrocodeposition Processes and Properties of Ni–SiC Nanocomposite Coatings

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Effects of Surfactants SDS and CTAB on Ni-SiC Deposition

Electrodeposition and Characterization of Nano-Structured Ni–SiC Composite Films

Corrosion Behavior of Ni-P-Nano-Al2o3 Composite Coating in the Presence of Anionic and Cationic Surfactants

Enhanced mechanical and wear properties of Ni-W-SiC composite coatings by synergistic influence of micro-nano SiC mixture

Effect of SiC Nanoparticles on the Structure and Properties of Ni+W-SiC Nanocoatings

Influence of Electrodeposition Process Parameters and Si3N4 Nanoparticle Concentration on Microhardness and Wettability of Ni-Co-Si3N4 Nanocomposite Coatings

Comparative study on the wear resistance and corrosion resistance of NiW and NiCoW composite coatings with micro- and nano-SiC particles

Effect of SiC Contents on Wear Resistance Performance of Electro-Codeposited Ni-SiC Composite Coatings

Investigation on Microstructure and Properties of the Electrodeposited Ni-SiC Composite Coating

Electrochemical Properties and XPS Analysis of Ni-B/SiC Nanocomposite Coatings

Microstructure Characterisation, Hardness, and Corrosion Behaviour of Nickel-Silicon Carbide Electrodeposition Coating with The Influence of Ultrasonic Agitation

Preparation, Mechanical Properties and Wear Resistance of Ni–W/SiC Nanocomposite Coatings

Influence of processing parameters on final characteristics of Ni-P-MWCNT coatings produced by pulsed electrodeposition

Electrodeposition of Ni-SiC Nanocomposite Film

Preparation and Characterization of Pulse Electrodeposited Ni/W-SiC Nanocomposite Coating on Mild Steel Substrate

Influence of particle size and surfactants on uniformity and quantity of silicon carbide particles in electrodeposited nickel-silicon carbide coatings

Microstructure evolution, mechanical and abrasive wear properties of NiCrSiB-SiC composite coatings prepared on 16Mn low-carbon steel by Ni-based alloy catalyzed SiC decomposition