Abstract:A strain-insensitive temperature sensor based on multimode interference using standard multimode fibers (MMFs) is proposed according to the comprehensive study of the characteristics of the MMFs. The temperature and strain dependences on the core diameter, numerical aperture (NA), and the length of the MMF section in the single-mode--multimode--single-mode (SMS) fiber structure are investigated experimentally. The results indicate that the larger core diameter of the MMF leads to higher temperature sensitivity but lower strain sensitivity (absolute values); the higher NA does not influence the temperature sensitivity but results in higher absolute value of strain sensitivity; the longer MMF section brings lower temperature sensitivity but does not have an impact on strain sensitivity. These findings also contribute to the theoretical analysis of the length dependence in the SMS fiber sensors. Besides, the results of the characterization study show that the strain sensitivity is relatively low, which brings a possibility to develop a strain-insensitive temperature sensor. The proposed sensor is used for temperature sensing while the strain is constantly applied from 0 to 1100 $\mu\epsilon$ with steps of 100 $\mu\epsilon$. The measured results are consistent with the comprehensive study. The mean temperature sensitivity is 6.14 pm/$^{\circ}$C with a standard deviation of 0.39 pm/$^{\circ}$C, which proves that the proposed temperature sensor exhibits good stability and is insensitive to strain. We expect that these results will provide a profound guideline to fiber sensors based on multimode interference.

Strain Sensor Based on Two Concatenated Abrupt-Tapers in Twin-Core Fiber

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

High Sensitivity Strain Sensor Based on a Novel Offset-Core Single Micro-Tapered Fiber-Optic Mach-Zehnder Interferometer

An All Fiber Mach-Zehnder Interferometer Based on Tapering Core-Offset Joint for Strain Sensing

Highly sensitive strain sensor based on helical structure combined with Mach-Zehnder interferometer in multicore fiber

A Novel MZI Fiber Sensor with Enhanced Curvature and Strain Sensitivity Based on Four-Core Fiber

A Novel Strain Sensor with Large Measurement Range Based on All Fiber Mach-Zehnder Interferometer

A strain sensor based on in-line Mach-Zehnder interferometer with thin-core fiber

Ultrasensitive Strain Sensor Based on Mach-Zehnder Interferometer with Bent Structures

Highly sensitive strain sensing using a polarization-maintaining photonic crystal fibre based Mach–Zehnder interferometer

High-Sensitivity Microfiber Strain and Force Sensors

The Strain Sensor with Enhanced Sensitivity Based on Improved Optical Fiber Michelson Interferometer

[Methods of staging in colorectal cancers].

ALLOMETRIC EXPONENTS SUPPORT A 3/4-POWER SCALING LAW

High Sensitivity Strain Sensors Using Four-Core Fibers through a Corner-Core Excitation

Fiber-optic multimode interference sensing: comprehensive characterization and its potential for strain-insensitive temperature sensing

Axial strain and temperature sensor based on tapered seven-core fiber operating at dispersion turning point

Optical Fiber Strain and Temperature Sensor Based on an In-Line Mach–Zehnder Interferometer Using Thin-Core Fiber

Photonic crystal fiber strain sensor based on multimode/air spherical cavity structure

Temperature self-compensation strain sensor based on cascaded concave-lens-like long-period fiber gratings

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure