Abstract:Selective laser melting(SLM) technology is adopted to form AlSi10Mg alloy and the microstructure and tensile property at room temperature arc studied. The results show that SLM formed AlSi10Mg alloy has fine microstructure and high room temperature tensile properties, and the microstructure and strength show obvious anisotropy. The high cooling rate in SLM process refine the previous alpha-Al dendrites significantly, and the different solidification conditions in the core and boundary of melt pool can not only lead to different scales of a-Al dendrites, but determine the growth morphology of alpha-Al dendrites, which follows the law of epitaxial growth. Combination of the morphology and evolution of Al-Si eutectic structure of sample in different orientations, the anisotropy of microstructure is investigated. Furthermore, the strength of tensile samples along deposition (L) and scanning (T) directions is almost the same, while the elongation shows double relationship, so the different mechanical properties arc due to its anisotropy of ductility. The SEM morphology of tensile fracture presents the crack mechanism, the size of the dimple, morphology of Al-Si eutectic structure and formation of micro cracks prove that the crack mode is intergranular fracture. The experimental results show that the microstructure and properties of SLM formed AiSi10Mg arc higher than those of conventional cast components, which make SLM technology realizable in engineering application of typical components manufacturing in the field of aero engine control system.

Anisotropy of Microstructure and Tensile Properties of AlSi10Mg Formed by Selective Laser Melting

Microstructure, porosity and mechanical properties of selective laser melted AlSi10Mg

Microstructure and Mechanical Properties of Selective Laser Melted Mg-9 Wt%al Powder Mixture

Achieving Superior Strength and Ductility of AlSi10Mg Alloy Fabricated by Selective Laser Melting with Large Laser Power and High Scanning Speed

Study on microstructure and properties of selective laser melting formed AlSi10Mg alloy

Comparative Study of Performance Comparison of AlSi10Mg Alloy Prepared by Selective Laser Melting and Casting

Effect of Processing Parameters on Tensile Properties and Microstructure of Selective Laser Melted AlSi10Mg Alloy

Strength and Strain Hardening of a Selective Laser Melted AlSi10Mg Alloy

The AlSi10Mg Samples Produced by Selective Laser Melting: Single Track, Densification, Microstructure and Mechanical Behavior

Microstructural evolution and strengthening mechanism of high-strength AlSi8.1 Mg1.4 alloy produced by selective laser melting

Evolution of Heterogeneous Microstructure and its Effects on Tensile Properties of Selective Laser Melted AlSi10Mg Alloy

Microstructure and mechanical property of annealing heat treated AlSi10Mg alloy fabricated by selective laser melting

Process Optimization and Mechanical Property Evolution of AlSiMg0.75 by Selective Laser Melting

Microstructural analysis and mechanical properties of AlSi10Mg alloy components produced via SLM

Mechanical Properties of AlSi10Mg Lattice Structures Fabricated by Selective Laser Melting

Effect of bimodal microstructure on the tensile properties of selective laser melt Al-Mg-Sc-Zr alloy

Additive manufacturing of a high strength Al-5Mg2Si-2Mg alloy: Microstructure and mechanical properties

Selective Laser Melting of High Strength Al–Cu–Mg Alloys: Processing, Microstructure and Mechanical Properties

In-situ tensile testing of fracture and strain in a selective laser melted AlSi10Mg alloy

Microstructure, Cracking Behavior and Control of Al–Fe–V–Si Alloy Produced by Selective Laser Melting

Role of Melt Pool Boundary Condition in Determining the Mechanical Properties of Selective Laser Melting AlSi10Mg Alloy