Abstract:Selective laser melting (SLM) has found extensive applications in the realm of metal printing as an additive manufacturing technique. The performance of metals fundamentally dictates their industrial utility. Aluminum alloys, the second most utilized alloy following steels, have extensive applications in aerospace, automotive components, biomedicine, etc. Among these alloys, AlSi10Mg stands out as one of the most extensively researched aluminum alloys in SLM. Nevertheless, conducting experimental trials with varying materials and process parameters proves not only to be expensive but also time-consuming. Numerical simulations have emerged as viable solutions to address this challenge. Consequently, in order to more successfully conquer this challenge, based on the solidification theory, this paper provides an exposition on the formation process of SLM and metallurgical defects. It comprehensively reviews the current state of numerical simulations for SLM formed AlSi10Mg, addressing three crucial aspects: heat and mass transfer processes, microstructure evolution, and mechanical properties. These discussions are structured around different problem scales and physical phenomena, encompassing thermodynamic process numerical simulations (based on high-fidelity heat analysis models at the powder scale and heat conduction models relying on the continuum assumption), microstructure evolution prediction simulations (utilizing phase field methods and cellular automaton approaches), and mechanical performance analysis simulations (encompassing models that do not consider any defects, those that consider defects, and those that factor in underlying grain structures). The applicability and distinct characteristics of each model are analyzed, followed by an exploration of the process-structure-performance relationship modeling. On this basis, the challenges and trends facing numerical simulation of SLM formed AlSi10Mg are summarized, especially the application of data-driven in numerical simulation.

Microstructure, wear and residual stresses of selective laser melting AlSi10Mg solid cylinder

Microstructure and Mechanical Properties of Selective Laser Melted Mg-9 Wt%al Powder Mixture

Microstructural analysis and mechanical properties of AlSi10Mg alloy components produced via SLM

On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties

Microstructure, metallurgical defects and hardness of Al–Cu–Mg–Li–Zr alloy additively manufactured by selective laser melting

Selective Laser Melting Process Optimization and Mechanical Properties Evolution of AlSi10Mg by Determining Temperature of the Build Chamber using Arduino IDE and Coding Algorithm

The AlSi10Mg Samples Produced by Selective Laser Melting: Single Track, Densification, Microstructure and Mechanical Behavior

Selective laser melting of Al-3.48Cu-2.03Si-0.48Sc-0.28Zr alloy: Microstructure evolution, properties and metallurgical defects

Effect of Processing Parameters on Tensile Properties and Microstructure of Selective Laser Melted AlSi10Mg Alloy

Microstructure evolution during selective laser melting of metallic materials: A review

Microstructure–Texture–Mechanical Property Relationship in Alloys Produced by Additive Manufacturing Following Selective Laser Melting (SLM) Technique

Comparison of AlSi7Mg0.6 alloy obtained by selective laser melting and investment casting processes: Microstructure and mechanical properties in as-built/as-cast and heat-treated conditions

A review on the simulation of selective laser melting AlSi10Mg

Study on microstructure and properties of selective laser melting formed AlSi10Mg alloy

Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation

Microstructure evolution and mechanical properties of Al-Al2O3 composites fabricated by selective laser melting

Effects processing parameters and building orientation on the microstructural and mechanical properties of AlSilOMg parts printed by selective laser melting

A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends

Selective Laser Melting of Al-Cu-Mn-Mg Alloys: Processing and Mechanical Properties

Microstructural evolution and strengthening mechanism of high-strength AlSi8.1 Mg1.4 alloy produced by selective laser melting

Cracking Behavior, Microstructure and Properties of Selective Laser Melted Al-Mn-Mg-Sc-Zr Alloy